Everbuild SBR Bond - 2.5 Litre - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for builders, contractors, and DIY enthusiasts looking to enhance the performance and durability of cement-based applications. Everbuild SBR Bond improves water resistance and adhesion, making it ideal for use in humid environments. However, it's essential to follow the correct mixing ratios and application methods to achieve optimal results.
All features
| Colour | White |
|---|---|
| Model Part Number | EVBSBR2L |
| Brand | Everbuild |
Extended Product Information
FAQs
What is the shelf life of Everbuild SBR Bond?
The shelf life is typically 12 months from the date of manufacture when stored in original, unopened containers in a cool, dry place.
Can Everbuild SBR Bond be used with all types of cement?
Yes, it is compatible with most cement-based products. Always test a small area first to ensure compatibility.
What is the recommended mixing ratio?
The mixing ratio depends on the specific application. Refer to the product data sheet for detailed guidance.
Is it safe to use in contact with drinking water?
No, Everbuild SBR Bond is not intended for use in contact with drinking water.
How long does it take for the mixture to dry?
Drying time depends on factors such as temperature, humidity, and the thickness of the application. Refer to the product data sheet for specific guidance.
How should I clean up spills?
Clean up spills and tools immediately with water while the product is still wet.
Can I use this product in freezing temperatures?
While the product is freeze-thaw stable, it is best to apply in temperatures above freezing for optimal results.
Troubleshooting
Mixture seems too thick or difficult to work with.
Ensure the correct water to SBR Bond ratio has been followed. If necessary, slightly adjust water content, but do not exceed the recommended maximum.
Poor adhesion to the substrate.
Ensure the substrate has been adequately prepared (cleaned and free of contaminants). If applying to a smooth surface, consider priming with a suitable primer.
Cracking or flaking after drying.
Ensure proper curing conditions (preventing rapid drying). Provide adequate ventilation, and keep the surface moist for the recommended time.
Pros and Cons
Pros
- Improves water resistance, crucial in damp or humid environments.
- Enhances the durability and flexibility of cement mixtures.
- Increases adhesion to a variety of substrates.
- Provides frost resistance, expanding the range of usable conditions.
- Easy to use and integrates seamlessly into existing cement-based processes.
Cons
- Requires precise mixing ratios to achieve optimal performance.
- May slightly increase the cost per application compared to standard cement mixtures.
- Can be messy if not handled carefully during mixing and application.
Setup, Compatibility & Care
- Preparation: Ensure all surfaces are clean, sound, and free from loose materials, dust, oil, or grease.
- Mixing: Mix Everbuild SBR Bond with water according to the manufacturer's recommended ratio for the specific application. Add the SBR Bond to the mix water first.
- Application: Apply the cement mixture as per usual, following the guidelines for the specific application (e.g., screeding, rendering, tiling).
- Compatibility: Compatible with most cement-based products. Always conduct a small test area before full application to ensure compatibility.
- Care: Store in a cool, dry place. Avoid freezing. Clean tools immediately after use with water.