Phoenix Contact Fuse Clamp - 3036372
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for electrical engineers and technicians working with control cabinets and industrial automation. The Phoenix Contact ST 4-FSI/C terminal block offers a secure and reliable way to integrate fuses into your circuits, simplifying troubleshooting and enhancing safety. A key caveat is its specific fuse type requirement, so ensure compatibility before integration. This compact, black terminal block features spring-cage connections, supports a 30A current, and mounts easily on standard DIN rails.
All features
| Model Part Number | 3036372 |
|---|---|
| Brand | Phoenix Contact |
Extended Product Information
FAQs
What type of fuse does the ST 4-FSI/C terminal block use?
The ST 4-FSI/C terminal block is designed to accept flat fuses of Type C.
What is the maximum wire size this terminal block can accommodate?
It can accommodate wire sizes ranging from 0.08 mm² up to 6 mm² (which is equivalent to approximately 28 to 10 AWG).
Can this terminal block be used in high-temperature environments?
Yes, the terminal block has a wide operating temperature range of -60°C to +105°C, making it suitable for many industrial environments.
How is the terminal block attached to a mounting rail?
It is designed for easy mounting on standard NS 35/7.5 and NS 35/15 DIN rails by snapping onto the rail.
What is the purpose of the spring-cage connection?
The spring-cage connection provides a vibration-proof, reliable, and tool-free connection method that ensures consistent contact pressure over time.
What is the rated voltage and current for this terminal block?
The rated voltage is 400 V, and the nominal current is 30 A.
Is this terminal block suitable for outdoor applications?
Its wide operating temperature range and robust construction suggest suitability for many outdoor applications, provided environmental factors like moisture and direct exposure are managed appropriately according to the installation's requirements.
Troubleshooting
Terminal block not mounting securely to DIN rail
Ensure you are using a compatible NS 35/7.5 or NS 35/15 rail and that the rail is correctly installed. Check that no debris is obstructing the terminal block's mounting clip.
Poor electrical connection or intermittent signal
Verify that the wires are stripped to the correct length and inserted fully into the spring-cage terminals. Ensure the wire gauge is within the specified range (0.08-6 mm²). Check for any damage to the wire conductor or terminal.
Fuse blows repeatedly
This indicates an overcurrent or short circuit issue in the protected circuit, not a fault of the terminal block itself. Investigate the connected load and wiring for faults. Ensure the replacement fuse has the correct amperage rating.
Difficulty inserting wire
Ensure the wire is properly stripped and that no stray strands are present. For very small gauge wires, a slight twisting motion might help, but avoid damaging the conductor. Ensure the terminal opening is clear.
Pros and Cons
Pros
- Simplifies circuit design by integrating fuse protection.
- Provides secure and low-maintenance connections via spring-cage technology.
- Robust construction suitable for harsh industrial environments.
- Space-saving design is ideal for crowded control panels.
- Broad compatibility with standard DIN rails and wire gauges.
Cons
- Requires a specific flat fuse type (Type C), limiting fuse options.
- Single-level design may not be suitable for complex multi-tier wiring needs.
- Spring-cage connections may require specific tool knowledge for optimal installation.
- Lower voltage rating compared to some other terminal block types.
Setup, Compatibility & Care
Setup:
- Ensure the appropriate flat fuse (Type C) is selected for the circuit's protection needs.
- Strip the wire ends to the recommended length for the spring-cage connection.
- Insert the stripped wire end firmly into the connection terminal.
- Mount the terminal block onto a standard NS 35/7.5 or NS 35/15 DIN rail by snapping it into place.
Compatibility:
- DIN Rails: Compatible with NS 35/7.5 and NS 35/15 mounting rails.
- Fuses: Designed specifically for flat fuses, Type C.
- Wire Gauge: Supports solid and stranded wires from 0.08 mm² to 6 mm² (28-10 AWG).
Care:
- Periodically inspect connections for signs of wear or damage.
- Keep the terminal block clean and free from dust and debris. Use a dry cloth for cleaning; avoid solvents or abrasive materials.
- Ensure the fuse is correctly seated within the holder during installation and replacement.