WAGO 770-114 - 4-Pole Strain Relief Connector Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The WAGO 770-114 is a professional 4-pole electrical connector designed for secure and reliable cable management in industrial and commercial settings. Its key benefit is integrated strain relief, ensuring protected and robust connections. A potential caveat is its specific compatibility requirements for wire cross-section and type. This 8-way distribution block features clamp termination, a 25A rating, and 400V voltage capacity, suitable for wires ranging from 0.5 to 4 mm².
All features
| Model Part Number | 770-114 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What is the primary advantage of the integrated strain relief?
The integrated strain relief protects the electrical connections from mechanical stress caused by cable pulling or movement, enhancing reliability and lifespan.
What is the maximum wire size this connector can handle?
The WAGO 770-114 is compatible with wire cross-sections from 0.5 mm² up to 4.00 mm².
Can this connector be used for both solid and stranded wires?
Yes, it is designed to accommodate both solid and stranded conductors within its specified wire gauge range.
What does the '8-Way' refer to in the product description?
The '8-Way' indicates that this distribution block can connect one input to up to eight output connections or distribute a signal to eight points.
What is the voltage and current rating for the WAGO 770-114?
The connector has a voltage rating of 400 V and a current rating of 25 A.
Is this connector suitable for outdoor use?
While robust for industrial settings, its suitability for outdoor use depends on environmental factors and specific IP ratings. It is primarily designed for indoor industrial and commercial applications.
How do I ensure a proper connection with the clamp termination?
Ensure the wire insulation is stripped to the correct length and the conductor is inserted fully into the terminal. The clamp mechanism will then securely grip the wire.
Troubleshooting
Connection is not secure
Ensure wires are stripped to the correct length and inserted fully into the clamp terminals. Check that the wire cross-section is within the specified range (0.5-4 mm²).
Connector does not mate properly
Verify that both the plug and socket are the correct WAGO 770 series components and are oriented correctly. Check for any obstructions in the mating interface.
Intermittent power loss
Inspect all wire connections for proper seating and any signs of damage. Ensure the strain relief is properly engaged to prevent cable movement from loosening connections.
Overheating at connection point
Confirm the wire size is appropriate for the current being drawn and is within the connector's 25A rating. Ensure a clean and secure connection for all conductors.
Pros and Cons
Pros
- Provides excellent strain relief for secure cable connections.
- Accommodates a wide range of wire sizes (0.5-4 mm²).
- High current (25A) and voltage (400V) rating for demanding tasks.
- Compact 8-way distribution simplifies wiring layouts.
- Durable construction suitable for industrial environments.
Cons
- Specific compatibility required (Type A coding, 4.00 mm² wire cross-section for housing).
- Requires precise stripping of wires for optimal clamp connection.
- Not designed for applications requiring extremely high flexibility or frequent disconnection.
Setup, Compatibility & Care
Setup:
- Ensure the power source is de-energized before installation.
- Strip the insulation from the wires to the appropriate length as specified for the clamp termination system.
- Insert the stripped wires into the respective slots of the 4-pole connector. The clamp mechanism will secure the wires automatically.
- Connect the male plug to the female socket, ensuring a firm click to confirm engagement.
- Secure the cable to the integrated strain relief by tightening the housing.
Compatibility:
- Wire Cross-Section: Compatible with solid and stranded wires ranging from 0.5 mm² to 4.00 mm².
- Coding: Type A specifications for mating.
- Voltage/Current: Suitable for applications up to 400 V and 25 A.
Care:
- This connector is maintenance-free under normal operating conditions.
- Periodically inspect connections for physical damage or loose cables.
- Clean the exterior with a dry or slightly damp cloth if necessary. Avoid using solvents or abrasive cleaners.