Humbrol Gloss Varnish - 14ml - 35 - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for model enthusiasts and hobbyists looking to protect and enhance their creations with a glossy finish. The Humbrol Gloss Varnish provides a durable, glossy layer, protecting models from damage. Note that drying times can vary based on environmental conditions.
All features
| Colour | White |
|---|---|
| Model Part Number | 22.AA0388 |
| Brand | Humbrol |
Extended Product Information
FAQs
What surfaces can I use this varnish on?
This varnish is suitable for most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, and sealed hardboard.
How long does it take to dry?
The gloss varnish usually dries within 1-2 hours.
How do I clean my brushes after use?
Clean your brushes with Humbrol Enamel Thinners.
Can I use this varnish with an airbrush?
Yes, you can airbrush the varnish. Thin the varnish with Humbrol Enamel Thinners using a ratio of 2 parts paint to 1 part thinner.
How much area does a 14ml tin cover?
A 14ml tin covers approximately 0.3 m² depending on the thickness of the application.
What is the finish like?
The finish is a high-gloss, shiny appearance.
What should I do if the varnish is too thick?
Add Humbrol Enamel Thinners to achieve the desired consistency.
Is this product suitable for children?
Yes, it is recommended for children, but adult supervision is advised.
Troubleshooting
Varnish is not drying properly.
Ensure the room temperature is within the recommended range and humidity is not too high. Allow additional drying time, up to 2 hours.
Brush strokes are visible.
Apply thinner coats and ensure the brush is clean. For a smoother finish, consider airbrushing with appropriate thinning.
Varnish appears cloudy.
Make sure the surface is clean and free of moisture. Apply the varnish in a well-ventilated area to prevent clouding.
Pros and Cons
Pros
- Provides a durable, glossy finish.
- Fast drying time allows for quicker project completion.
- Can be used on multiple surfaces.
- Easy to apply with a brush.
- Protects the model from damage.
- Easy cleanup with appropriate thinners.
Cons
- Requires Humbrol Enamel Thinners for cleanup.
- Drying times can vary based on environmental conditions.
- Not suitable for application with a 3D effect.
- May require multiple coats for optimal results.
- Strong odor due to solvent base.
- Product is permanent once dry.
Setup, Compatibility & Care
- Preparation: Ensure the model surface is clean and dry.
- Application: Apply the varnish with a brush. Two thin coats are preferable to one thick coat.
- Thinning (Optional): If airbrushing, thin with Humbrol Enamel Thinners (2 parts paint to 1 part thinner).
- Drying: Allow to dry for 1-2 hours.
- Cleanup: Clean brushes with Humbrol Enamel Thinners.
Compatibility:
- Suitable for: Plastic, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard, and more.
Care:
- Store in a cool, dry place.
- Keep away from direct sunlight.
- Ensure the lid is tightly closed to prevent drying out.