EPOXY GLUE 151 ADHESIVE RESIN - 151 - 1511170
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the 151 Epoxy Adhesive, a fast-setting, two-part adhesive ideal for various household repairs. The key benefit is its ability to create a strong, durable bond on multiple materials. A key consideration is the need to mix the resin and hardener correctly for optimal results.
All features
| Model Part Number | 1511170 |
|---|---|
| Brand | 151 |
Extended Product Information
FAQs
How long does it take to set?
The 151 Epoxy Adhesive sets quickly, usually within minutes. Refer to the product packaging for specific setting times.
What materials can I bond with this adhesive?
It can bond china, metal, glass, leather, rubber, wood, and most plastics.
Can I use this adhesive outdoors?
Yes, it is suitable for both interior and exterior use.
What should I do if the adhesive gets on my skin?
Wash the affected area thoroughly with soap and water. If irritation persists, consult a physician.
How should I store the adhesive?
Store in a cool, dry place, away from direct sunlight and extreme temperatures.
Is the included spatula reusable?
It is recommended to use the spatula for one-time use only. Dispose of it after mixing.
What is the shelf life of the epoxy?
The shelf life is dependent on storage conditions. Check the expiry date on the packaging.
Troubleshooting
Adhesive not setting
Ensure the resin and hardener were mixed in equal parts and mixed thoroughly. Check the expiry date.
Bond not strong
Make sure surfaces were clean before application. Allow for sufficient curing time.
Difficult to dispense
Ensure tubes are not blocked; clear nozzle or replace the tube if necessary.
Pros and Cons
Pros
- Quick bonding time
- Suitable for a wide range of materials
- Can be used indoors and outdoors
- Easy to use with included spatula
- Two-pack provides good value
Cons
- Requires careful mixing of resin and hardener
- Bonding effectiveness can be affected by improper mixing
- Not suitable for all plastics
- May not be ideal for very large-scale projects
- Working time is limited due to fast setting
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean, dry, and free of grease or oil.
- Mixing: Dispense equal amounts of resin and hardener onto a disposable surface and mix thoroughly using the included spatula.
- Application: Apply the mixture to both surfaces to be bonded.
- Assembly: Join the parts and hold them together until the epoxy sets.
- Curing: Allow the adhesive to fully cure according to the product instructions for maximum strength.
Compatibility:
The 151 Epoxy Adhesive is compatible with: China, metal, glass, leather, rubber, wood, and most plastics.
Care:
- Store in a cool, dry place.
- Avoid contact with skin; wear gloves.
- Clean up spills immediately with a solvent like acetone.