UniBond No More Nails 3In1 White - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The UniBond No More Nails 3in1 White is a versatile adhesive, sealant, and filler designed for DIY enthusiasts and professionals tackling a wide range of projects. Its key benefit is its ability to bond numerous materials, including challenging ones like stone, brass, and copper, while also filling gaps up to 35mm, all in a single product. A potential caveat is the recommendation to test water-based paints on a small area before full application to ensure compatibility and a clean finish. This product simplifies projects by combining three functions into one, offering strong instant tack, water resistance, and anti-mould properties.
All features
| Colour | White |
|---|---|
| Model Part Number | 3031081 |
| Brand | Unibond |
Extended Product Information
FAQs
Can I use this product for exterior applications?
Yes, UniBond No More Nails 3in1 White is suitable for both indoor and outdoor applications and is water-resistant once cured.
What is the maximum gap I can fill with this product?
This product can fill gaps of up to 35mm.
How long does it take to cure?
Curing time varies depending on the application size and environmental conditions (temperature, humidity). Refer to the product packaging for specific guidelines, but typically it requires 24-48 hours for a full cure.
Is this product suitable for flexible joints?
While it offers some flexibility, it is primarily designed for rigid bonding and gap filling. For highly flexible joints, a dedicated flexible sealant might be more appropriate.
Can I paint over the product immediately after application?
No, the product must be fully cured before painting. It is also recommended to test water-based paints on a small area first to ensure compatibility.
What materials can it bond?
It bonds a wide range of materials including stone, brass, copper, wood, plaster, metal, glass, and most plastics.
Does it have any resistance to mould?
Yes, the formula includes anti-mould protection.
Troubleshooting
Product not dispensing evenly
Ensure the nozzle is cut correctly for the desired bead size and that the cartridge is properly seated in the sealant gun. Check for any blockages in the nozzle.
Poor adhesion to a surface
Verify that the surface was thoroughly cleaned, dried, and free from any contaminants like dust, grease, or old adhesive before application.
Product remains tacky after extended period
This could be due to excessive application depth or adverse environmental conditions (low temperature, high humidity). Ensure application is within recommended limits and conditions.
Paint finish is uneven or peeling
The paint may not have been compatible or applied after insufficient curing time. Always test paint compatibility on a small section and ensure the product is fully cured before painting.
Pros and Cons
Pros
- Versatile multi-purpose product saves time and money.
- Bonds difficult materials like stone, brass, and copper.
- Can fill substantial gaps (up to 35mm).
- Water and shock resistant for durability.
- Paintable for a customized finish.
- Contains anti-mould properties.
Cons
- Requires testing for paint compatibility.
- May not be suitable for all flexible materials.
- Curing time may vary depending on conditions.
Setup, Compatibility & Care
Setup: Ensure surfaces are clean, dry, and free from dust, grease, or loose material before application. Cut the nozzle to the desired bead size. Apply using a standard sealant gun.
Compatibility: Bonds most building and decorating materials including porous and non-porous surfaces. Compatible with stone, brass, copper, wood, plaster, metal, glass, and most plastics. For painting, use water-based paints after the product has fully cured; always test on a small, inconspicuous area first.
Care: Store in a cool, dry place away from direct sunlight. Keep the container tightly sealed. Clean up any excess uncured product with a damp cloth. Cured product may require mechanical removal.