Connect Fuse Connector - Mini Blade end with 250 Male Terminals - 4 Piece Set
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 4-piece set of Connect Fuse Connector Mini Blade connectors is designed for automotive electrical applications requiring a reliable connection for mini blade fuses. It offers a straightforward way to add an accessory circuit or tap into existing wiring with its 250 male terminals. While easy to install, users must ensure they do not exceed the 30-amp maximum current rating for safety.
All features
| Model Part Number | 37155 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What type of fuse does this connector use?
This connector is designed for mini blade fuses.
What does '250 Male Terminals' mean?
It refers to the size and type of the male electrical terminals on the connector. These are designed to plug into standard 250-type female receptacles found in automotive wiring.
What is the maximum current this connector can handle?
The connector is rated for a maximum of 30 amps.
Can I use this for any car accessory?
Yes, provided the accessory's current draw does not exceed 30 amps and it uses a mini blade fuse. Always ensure the circuit you are tapping into can support the additional load.
Does this set include fuses?
No, this is a 4-piece set of connectors only. Fuses are not included and must be purchased separately.
How do I install this connector?
You insert a mini blade fuse into the connector, then plug the connector's terminals into the appropriate female connectors in your vehicle's wiring, typically in a fuse box or accessory harness.
Can I use this on a 24V system?
These connectors are designed for standard 12V DC automotive systems. Using them on higher voltage systems is not recommended and may be unsafe.
Troubleshooting
Accessory not receiving power
Verify the fuse is correctly seated in the connector and that the connector's terminals are securely attached to the mating female connectors. Check that the vehicle's fuse slot is functional and provides power.
Loose connection
Gently ensure the 250 male terminals are fully seated within the mating female connectors. If the female connectors are worn, consider replacing them.
Fuse blows repeatedly
The accessory may be drawing too much current for the circuit or the accessory itself may be faulty. Ensure the accessory's draw does not exceed 30 amps and that the chosen fuse amperage is appropriate for the accessory and wiring.
Pros and Cons
Pros
- Provides a simple method for adding electrical accessories.
- Secure connection via 250 male terminals.
- Convenient 4-piece pack for multiple uses.
- Suitable for higher-draw automotive accessories up to 30A.
- Easy to understand and install for DIY users.
Cons
- Requires basic knowledge of automotive wiring.
- Terminals are male; requires corresponding female connectors.
- Not suitable for use beyond its 30-amp rating.
- Limited to mini blade fuse types only.
Setup, Compatibility & Care
Setup:
- Identify the desired fuse slot in your vehicle's fuse box. Ensure the circuit is appropriate for the accessory you are powering and that the existing fuse amperage is sufficient.
- Insert a mini blade fuse (not included) into the connector's fuse holder.
- Connect the 250 male terminals to the corresponding female terminals in your vehicle's wiring harness or accessory power cable.
- Ensure a secure physical connection.
Compatibility:
- Fuse Type: Compatible exclusively with mini blade fuses.
- Terminal Size: Designed for 250-type male terminals, requiring mating female connectors.
- Vehicle Use: Primarily intended for 12V DC automotive electrical systems.
- Current Rating: Maximum 30 amps. Do not exceed this limit.
Care:
- Keep connectors clean and dry when not in use.
- Periodically inspect connections for signs of corrosion or damage.
- Avoid exposing connectors to excessive moisture or extreme temperatures.