Loops 6X 90W Black Wall Mounted Stereo Speakers 5.25" 8Ohm - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Loops 6X 90W Black Wall Mounted Stereo Speakers are ideal for users looking to create an immersive home cinema or Hi-Fi audio setup. Offering quality stereo sound with 90W of power per speaker, they provide a significant audio upgrade for any room. A key consideration is their 8 Ohm impedance, which requires a compatible stereo amplifier, and careful attention is needed if connecting multiple pairs to avoid impedance drops.
All features
| Colour | Black |
|---|---|
| Series | string |
| Brand | Loops |
Extended Product Information
FAQs
How many speakers are included in this product?
This product includes three pairs of speakers, totaling six individual 5.25" stereo speakers.
What type of amplifier do I need for these speakers?
You need a stereo amplifier. These speakers are rated at 8 Ohms and are not compatible with 100V systems.
Can I connect two pairs of these speakers to my amplifier?
Yes, you can connect two pairs (4 speakers total). However, this will reduce the total impedance to 4 Ohms. Ensure your amplifier is rated to handle a 4 Ohm load to prevent damage.
Are wall mounting brackets included?
Yes, each speaker comes with an adjustable wall mounting bracket for flexible installation.
What are the dimensions of the speakers?
The product description does not specify exact dimensions, but they are described as compact and suitable for wall mounting.
What is the frequency response of these speakers?
The frequency response is 110Hz - 20kHz.
What is the power rating for each speaker?
Each speaker has a maximum power of 90W at 8 Ohms and an RMS power of 45W at 8 Ohms.
Troubleshooting
No sound from speakers
Check that the amplifier is powered on and volume is up. Verify speaker wire connections at both the amplifier and speaker terminals are secure and correctly wired for polarity (+/-). Ensure the amplifier is set to the correct input source.
Distorted or crackling sound
Reduce the volume. Check for loose speaker wire connections. Ensure the amplifier is not overloaded; if using multiple pairs, verify the amplifier's impedance compatibility (e.g., 4 Ohm capability).
One speaker not working
Swap speaker wires between the working and non-working speaker to isolate the issue to the speaker or the wiring/amplifier channel. Check the specific channel on the amplifier for faults.
Low volume output
Increase amplifier volume. Check amplifier settings and ensure it's not in a low-power mode. Verify speaker wire gauge is adequate for the run length.
Pros and Cons
Pros
- Provides a complete set of six speakers for surround sound or multi-room audio.
- Offers substantial 90W power output per speaker for clear, room-filling sound.
- Includes adjustable wall brackets for easy and flexible installation.
- Durable ABS plastic construction ensures longevity.
- Features separate tweeter and woofer for balanced audio reproduction.
Cons
- Requires a stereo amplifier; not compatible with 100V systems.
- Connecting multiple pairs can lower impedance, requiring an amplifier rated for 4 Ohms or lower.
- Bass response may be limited for users seeking deep sub-bass frequencies due to the 5.25" woofer size and frequency response.
- The 8 Ohm impedance might not be suitable for all existing amplifier setups without verification.
Setup, Compatibility & Care
Setup:
- Positioning: Determine desired speaker placement. Use the included adjustable wall mounting brackets for wall mounting. Ensure brackets are securely fastened to wall studs or appropriate anchors.
- Connection: Connect speaker wire from your amplifier's speaker terminals to the binding posts on the back of each speaker. Ensure correct polarity (+ to + and - to -).
Compatibility:
- Amplifier Type: These speakers must be powered by a stereo amplifier. They are NOT compatible with 100V PA systems.
- Impedance: The speakers are rated at 8 Ohms. If you connect two pairs (4 speakers) in parallel, the effective impedance drops to 4 Ohms. Ensure your amplifier is rated to handle at least a 4 Ohm load for such configurations.
Care:
- Cleaning: Wipe the speaker casings and grilles with a clean, dry or slightly damp soft cloth. Avoid abrasive cleaners or solvents.
- Dusting: Regularly dust the speakers to maintain appearance and prevent buildup on the grille or drivers.