Splashwall Alloy White Marble Effect Aluminium Splashback - 800mm H x 600mm W
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Splashwall Alloy splashback is designed for homeowners and renovators seeking a stylish, safe, and easy-to-install alternative to traditional tiling. It offers a beautiful, patterned splashback behind your hob or sink, eliminating the need for expensive glass covers or stainless steel hob panels. Note that while Alloy splashbacks are easy to cut for a custom fit, always ensure accurate measurements before installation.
All features
| Brand | Splashwall |
|---|
Extended Product Information
FAQs
Can I install this myself?
Yes, installation is designed to be easy. Following the provided instructions, you can install the splashback yourself. However, for complex installations, professional help is recommended.
What tools do I need?
You will need a measuring tape, a pencil, a saw or cutting tool, safety glasses, a level, Complete adhesive, a damp cloth, and potentially a straight edge.
How do I clean the Splashwall Alloy?
Use a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals to preserve the surface finish.
Is it heat-resistant?
Yes, it is fire-safe and can be used behind any hob.
Is it waterproof?
Yes, it is waterproof and suitable for use behind sinks and in wet areas.
Can I cut the panels to fit around outlets or other obstacles?
Yes, the panels can be cut to fit around outlets, cabinets, and other obstacles. Ensure accurate measurements before cutting.
What is the warranty?
Warranty information is not available in the provided product details. Please refer to your purchase documentation or contact the manufacturer for warranty details.
Troubleshooting
Splashback won't stick to the wall.
Ensure the wall surface is clean and dry. Use the correct adhesive and apply it evenly. Press firmly for the recommended time.
Difficulty cutting the splashback.
Use the right tools for cutting (e.g., a fine-toothed saw). Measure twice, cut once.
Edges don't align properly.
Ensure accurate measurements and precise cutting. Use a level during installation.
Adhesive oozing out from edges
Use the correct amount of adhesive. Wipe away any excess immediately with a damp cloth.
Pros and Cons
Pros
- Easy to install, saving time and money.
- Provides a stylish and modern kitchen aesthetic.
- Waterproof and fire-safe, ensuring safety and durability.
- Available in a variety of designs to match any kitchen decor.
- Customizable to fit any space, including around cabinets and corners.
Cons
- Requires accurate measurements for cutting and fitting.
- May require professional assistance for complex installations.
- The initial cost might be higher compared to some tiling options.
Setup, Compatibility & Care
Setup:
- Measure: Accurately measure the area where you want to install the splashback.
- Cut: Use appropriate tools to cut the splashback to the required size and shape. Always wear safety glasses.
- Prepare: Clean the wall surface to ensure it is dry and free of dust, grease, and loose particles.
- Apply Adhesive: Apply Complete adhesive evenly to the back of the splashback panel.
- Install: Carefully position the panel onto the wall and press firmly. Use a level to ensure the splashback is straight.
- Cure: Allow the adhesive to cure according to the manufacturer's instructions.
Compatibility:
- Compatible with all hob types.
- Suitable for use behind sinks.
- Can be installed on most wall surfaces, but ensure the surface is clean and level.
Care:
- Clean with a damp cloth and mild detergent.
- Avoid abrasive cleaners or scouring pads.
- Do not use harsh chemicals.