AK Interactive Real Colours Lacquer Paint - Rubber Black 17ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for modelers seeking a superior paint finish with excellent durability. AK Interactive Real Colors Lacquer Paint - Rubber Black provides a smooth, soft finish and exceptional adhesion. However, it requires proper ventilation and compatible thinners for optimal results. This guide covers key features, usage, troubleshooting, and care instructions to help you achieve professional-quality results.
All features
| Model Part Number | RC805 |
|---|---|
| Brand | AK Interactive |
Extended Product Information
FAQs
What is the best thinner to use?
AK Interactive recommends their RC701/RC702 High Compatibility Thinner for best results. Other thinners designed for lacquer paints can also be used.
Can I brush this paint on?
While it can be brushed, the manufacturer recommends airbrushing for the best results and finish.
How long does it take for the paint to dry?
Drying time varies depending on the environmental conditions, but it generally dries relatively quickly. Allow each coat to dry completely before applying the next.
How do I clean my airbrush after use?
Use a lacquer thinner to clean your airbrush thoroughly after each use. Disassemble the airbrush and clean all parts, paying close attention to the nozzle and needle.
Is primer necessary?
Primer is not always necessary, but it can improve adhesion and the final finish, especially on certain surfaces.
What surfaces can this paint be applied to?
This paint is designed for use on plastic model kits and can be used on a variety of surfaces. Always test on a small, inconspicuous area first.
How should I store the paint?
Store the paint in a cool, dry place, away from direct sunlight. Ensure the cap is tightly sealed to prevent the paint from drying out.
Troubleshooting
Paint is not adhering to the surface.
Ensure the surface is properly prepared (clean, dry, and primed if necessary). Try lightly sanding the surface for better adhesion.
Paint is clumping or clogging the airbrush.
Ensure the paint is properly thinned. Clean the airbrush thoroughly, paying attention to the nozzle and needle.
Paint is drying with a rough texture.
Ensure the paint is thinned correctly. Check the air pressure of your airbrush. Apply thin, even coats.
Paint runs or sags are appearing.
Apply thinner coats and allow each coat to dry before applying the next. Adjust the airbrush settings.
Pros and Cons
Pros
- Provides a smooth, even finish.
- Excellent adhesion to various surfaces.
- Dries quickly and evenly.
- Compatible with weathering products.
- Designed specifically for scale modeling.
- Superior chemical formula.
Cons
- Requires proper ventilation due to the lacquer base.
- May require specific thinners for optimal results.
- Application via airbrush is recommended for best results.
- Can be sensitive to humidity during drying.
- Requires careful cleaning of airbrush after use.
Setup, Compatibility & Care
- Preparation: Ensure the model surface is clean, dry, and free of dust and grease. A primer may be used, but is not always necessary with this paint.
- Thinning: Dilute the paint with RC701/RC702 High Compatibility Thinner or another appropriate lacquer thinner. The recommended ratio is typically between 1:1 and 2:1 paint to thinner, but this can vary depending on the airbrush and desired finish.
- Application: Use an airbrush to apply thin, even coats. Maintain a consistent distance from the model and avoid applying too much paint at once to prevent runs or pooling.
- Drying: Allow each coat to dry completely before applying the next. Drying time varies depending on environmental conditions but is usually relatively quick.
- Cleaning: Clean your airbrush thoroughly after each use with a lacquer thinner to prevent clogs and ensure optimal performance. Dispose of waste properly.
- Compatibility: This paint is compatible with a wide range of plastic model kits and can be used on various surfaces. Always test on a small, inconspicuous area first to ensure compatibility.
- Care: Store the paint in a cool, dry place, away from direct sunlight. Ensure the cap is tightly sealed to prevent the paint from drying out.