Cord Evira Professional Portable EV Charger - 10m 11kW
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Cord EVIRA Professional Portable EV Charger is designed for electric vehicle owners and professionals who need flexible, high-speed charging without permanent installation. Its key benefit is offering up to 11kW charging with adjustable settings and multi-socket compatibility, making it ideal for various locations. A potential caveat is that it requires a compatible 380V supply for maximum output, and adapters may be needed for different socket types.
All features
| Model Part Number | CRDWPC10M11KW |
|---|---|
| Brand | Cord |
Extended Product Information
FAQs
Do I need to install this charger permanently?
No, the Cord EVIRA Professional is a portable charger and does not require any permanent installation. It's designed for plug-and-play use.
What is the maximum charging speed?
The charger can provide up to 11kW fast charging. The actual speed depends on your vehicle's charging capability and the power supply it's connected to.
Can I use this charger with any electric car?
Yes, it is universally compatible with most electric vehicles and hybrids in the UK and Europe that use a Type 2 charging port.
What type of power outlets can I use?
The charger supports multi-input sockets, including UK 3-pin, Schuko, and CEE 16A/32A sockets. A UK plug adapter is included.
Is this charger safe to use outdoors?
Yes, it features IP65 waterproofing and IK10 impact resistance, making it suitable for use in various weather conditions and robust enough for demanding environments.
Can I schedule my charging session?
Yes, the charger includes a programmable delay timer, allowing you to set your charging session to start at a specific time.
What safety features are included?
It has built-in protections for earth faults, surge, overheating, over/under voltage, and PME faults.
Troubleshooting
Charger not starting charge
Verify the power source is active and supplying adequate voltage. Check if the vehicle's charging port is clean and the cable is securely connected to both the car and the power source. Review LCD for any error codes or messages.
Slow charging speed
Confirm the charging current setting on the LCD screen is not set lower than expected. Ensure the power source can support the desired charging speed (e.g., a 13A socket will limit charging to ~3kW regardless of charger settings).
Overheating protection activated
Disconnect the charger immediately and allow it to cool down. Inspect the power outlet and the charger's plug for any debris or damage. Ensure adequate ventilation around the charger and avoid using it in direct, intense sunlight for extended periods if ambient temperatures are very high.
LCD screen is blank or unresponsive
Check the power connection to the charger. If the issue persists after trying a different power outlet, contact customer support.
Pros and Cons
Pros
- Highly portable and requires no installation.
- Offers fast charging speeds up to 11kW.
- Versatile with multi-socket input compatibility.
- Durable and weather-resistant design for various environments.
- Advanced safety features provide peace of mind.
- Programmable settings offer flexible charging control.
Cons
- Requires a compatible 380V supply for maximum speed.
- Adapters may be necessary for certain socket types not directly supported.
- The 10m cable length, while good, might be insufficient for some very distant power sources.
- LCD screen can be less intuitive for users unfamiliar with EV charging settings.
- Higher initial cost compared to basic charging cables.
Setup, Compatibility & Care
Setup: The Cord EVIRA Professional is designed for plug-and-play simplicity. Ensure the charging station is placed on a stable surface, away from direct water spray (despite its waterproofing). Connect the appropriate power plug (UK 3-pin, Schuko, or CEE socket) to your available electricity source. Then, connect the Type 2 connector to your electric vehicle's charging port. Use the LCD screen to set desired charging current, delay timers, or kWh targets if needed.
Compatibility: This charger is universally compatible with most electric vehicles and plug-in hybrids sold in the UK and Europe that use a Type 2 charging port. It requires a 380V power supply for its maximum 11kW output. Ensure your power outlet and circuit can safely handle the selected charging current.
Care: To maintain optimal performance and longevity:
- Cleaning: Wipe the unit and cable with a dry or slightly damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the charger in a dry place when not in use, ideally in its original packaging or a protective case to prevent dust and damage.
- Inspection: Periodically inspect the cable and connectors for any signs of wear, cuts, or damage. Do not use if any damage is apparent.
- Temperature: While rated for -30°C to +50°C, avoid prolonged exposure to extreme conditions if possible.