Frenchic Paint - Pea Soup - 500ML


Currently unavailable


Currently unavailable
This Frenchic Paint in Pea Soup is ideal for DIY enthusiasts and furniture upcyclers looking for a durable, easy-to-use chalk and mineral paint with a sophisticated, soft-satin finish. Its primary benefit is the simplified preparation and finishing process, as it requires no primer or top coat and offers a robust, scuff-resistant surface. However, users should be aware that coverage estimates are based on a single coat, and two coats are recommended for optimal durability, effectively halving the usable area per tin.
| Colour | Green |
|---|---|
| Model Part Number | 39780694786135 |
| Brand | Frenchic |
No, Frenchic's chalk and mineral paint formula is designed to be self-priming and self-sealing, meaning you typically do not need separate primer or top coat products for most interior projects.
A 500ml tin is stated to cover up to 7m² with a single coat. However, for a more durable finish, two coats are recommended, meaning you can expect to cover approximately 3.5m² with two coats.
Yes, Frenchic Paint is suitable for various furniture, including kitchen cupboards, wood, and laminate surfaces. Its durable finish helps protect against everyday wear.
Yes, this paint is suitable for use on powder-coated radiators. Ensure the radiator is clean and free of rust before painting.
Painted surfaces should be cleaned gently with a damp cloth. Avoid using abrasive cleaners or harsh chemicals, which could damage the finish.
Recoat times are typically 1-2 hours. However, allow at least 7-14 days for the paint to fully cure and achieve its maximum durability.
Yes, Frenchic Paint is EN71-3 certified, making it safe for use on children's toys and furniture.
Stir the paint thoroughly. If still very thick, you can add a *very small* amount of water (a teaspoon per 500ml) and mix well. Ensure the ambient temperature is not too cold.
Ensure the paint is well-stirred before and during use. Apply thin, even coats. Allow adequate drying time between coats. A second coat is often necessary for full opacity.
This can sometimes occur in humid conditions or if the paint has not fully cured. Allow more time for curing, ideally in a well-ventilated area. Ensure you have applied at least two coats.
Ensure the surface was properly cleaned and degreased before application. Check if the surface is suitable (e.g., very glossy or slick surfaces might benefit from a light scuff, though Frenchic aims to minimize this). Confirm that two coats were applied and allowed to cure.
Setup:
Compatibility:
Care: