Hairpin Legs for Furniture - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and those looking to refurbish furniture. The key benefit is creating sturdy, characterful furniture with an industrial aesthetic. A caveat is that these legs are best suited for flat, stable surfaces. The GTV Hairpin Legs in Black offer a durable steel construction to create or replace legs on tables, benches, and countertops, providing a strong foundation with a distinct industrial style.
All features
| Colour | Black |
|---|---|
| Brand | GTV |
Extended Product Information
FAQs
What is the height of the hairpin legs?
The legs have a height of 304 MM (approximately 12 inches).
What are the rod diameter options?
These legs are available with rod diameters of 10 MM and 12 MM.
Are screws included with the legs?
No, screws are not included. You will need to source appropriate screws based on your tabletop material and thickness.
Can these legs be used for an outdoor table?
While the steel is durable, prolonged exposure to moisture may lead to rust. For outdoor use, consider applying a protective sealant.
What is the weight capacity of these legs?
The weight capacity depends heavily on the tabletop material, thickness, and the number of legs used. The 12 MM rod diameter offers greater stability for heavier loads compared to the 10 MM option.
How do I clean the black finish?
Wipe clean with a soft, dry or slightly damp cloth. Avoid harsh chemicals or abrasive materials.
Can I cut the legs shorter?
It is not recommended to cut the legs, as this can compromise the structural integrity and the finish.
Troubleshooting
Legs seem wobbly after installation
Ensure all screws are tightened securely. Check that the tabletop surface is completely flat and the legs are not being mounted on an uneven area. Verify that the correct rod diameter (12mm for heavier loads) is being used.
Screws not holding securely
Use longer screws if the material is thick enough, or consider using wood inserts for particleboard or MDF. Ensure pilot holes are drilled correctly for the screw size.
Plastic foot detached
The plastic foot can typically be pushed back onto the leg. If damaged, it may need to be replaced.
Pros and Cons
Pros
- Adds a modern, industrial look to furniture.
- Sturdy construction for reliable support.
- Protects floor surfaces with integrated plastic feet.
- Versatile for various DIY furniture projects.
- Easy to install on flat surfaces.
Cons
- May require pre-drilling holes in the tabletop.
- Primarily suited for flat, stable tabletops.
- Black color may not match all decor styles.
- Weight capacity depends on the tabletop material and mounting.
Setup, Compatibility & Care
Setup:
- Prepare Your Surface: Ensure the surface you are attaching the legs to (e.g., tabletop, bench seat) is flat and stable.
- Position Legs: Place the legs in the desired position on the underside of your surface.
- Mark Holes: Use a pencil to mark the screw hole locations.
- Drill Pilot Holes: (Recommended for harder woods) Drill small pilot holes to make screwing easier and prevent wood splitting.
- Attach Legs: Secure the legs using appropriate screws (not included). Ensure screws are long enough to grip securely but not so long they protrude through the top surface.
Compatibility:
- Tabletop Material: Best suited for wood, particleboard, or MDF surfaces that are at least 1.5-2 cm thick. Not recommended for glass or very soft materials without additional mounting considerations.
- Rod Diameter: Choose between 10 MM and 12 MM rods based on the intended use and weight capacity. The 12 MM option offers greater stability for heavier applications.
Care:
- Wipe clean with a dry or slightly damp cloth.
- Avoid abrasive cleaners that could scratch the black finish.
- Periodically check that screws remain tight, especially if the furniture is moved frequently.