G.Skill Trident Z RGB - DDR4 - 32 GB - 2 x 16 GB - 3600 MHz
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This G.Skill Trident Z RGB DDR4 memory kit is designed for PC builders and enthusiasts seeking a significant performance boost coupled with vibrant customizable lighting. Its key benefit is the combination of high speed (3600MHz) and a large capacity (32GB) for demanding applications and gaming, enhanced by striking RGB aesthetics. A potential caveat is the need for motherboard and BIOS support to fully utilize its XMP profiles and lighting synchronization features.
All features
| Colour | Multicolor |
|---|---|
| Series | Trident Z RGB |
| Model Part Number | F4-3600C16D-32GTZRC |
| Brand | G.Skill |
Extended Product Information
FAQs
What is the maximum speed this RAM can run at?
This kit is rated for 3600MHz with specific timings when XMP 2.0 is enabled. It will default to 2133MHz (SPD) if XMP is not enabled.
Do I need special software to control the RGB lighting?
Yes, you can use G.SKILL's Trident Z RGB software for standalone control or sync it with compatible motherboard RGB software like ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light, or ASRock Polychrome Sync.
Is this RAM compatible with servers?
This is a consumer-grade, unbuffered (unregistered) memory kit designed for PC/Server use that supports unbuffered DIMMs. It is not ECC (Error-Correcting Code) or registered memory, which is typically required for most enterprise-level servers.
How do I enable XMP 2.0?
You need to enter your motherboard's BIOS/UEFI during system startup (usually by pressing DEL or F2). Look for a setting related to memory profiles, XMP, or DOCP, and select the appropriate profile for your RAM.
Will this RAM fit in my small form factor PC?
The Trident Z RGB modules have a distinctive heatsink design and RGB light bar. Check the height specifications (around 44mm) against your case's CPU cooler clearance and RAM slot limitations.
What is CAS Latency (CL)?
CAS Latency (CL) is the number of clock cycles it takes for the memory to start sending data after it receives a command. A lower CL number, like 16, indicates faster response times.
Can I mix these modules with other RAM sticks?
It is generally recommended to use identical RAM kits for optimal stability and performance. Mixing modules with different speeds, timings, or capacities can lead to compatibility issues or force all modules to run at the slowest common settings.
Troubleshooting
System does not boot or POSTs with new RAM
Ensure RAM modules are fully seated in their slots. Try booting with only one module at a time. Verify motherboard compatibility with the RAM speed and capacity. Reset BIOS to default settings and then re-enable XMP.
RAM not running at advertised speed (3600MHz)
Enable the XMP 2.0 profile in your motherboard's BIOS/UEFI. Check if your CPU's memory controller can support 3600MHz or if a manual overclock is needed. Ensure your motherboard supports this speed.
RGB lighting not working or not syncing
Ensure the RGB control software is installed and up-to-date. Verify that your motherboard supports RGB synchronization with G.SKILL Trident Z RGB. Check the software settings for correct module detection and effect selection.
System instability or crashes
Run a memory diagnostic tool (like Windows Memory Diagnostic or MemTest86). If instability occurs only with XMP enabled, try running at JEDEC (SPD) speeds or slightly reducing the XMP frequency or timings. Ensure adequate system cooling.
Pros and Cons
Pros
- High performance with 3600MHz speed and CL16 latency.
- Striking customizable RGB lighting for aesthetic builds.
- Generous 32GB capacity suitable for gaming and professional use.
- Easy performance tuning with XMP 2.0 support.
- Robust build quality with efficient heatsink design.
- Compatibility with major motherboard RGB sync software.
Cons
- Requires motherboard support for full RGB synchronization.
- XMP profiles may need manual BIOS adjustment on some systems.
- Higher cost compared to non-RGB or lower-speed memory kits.
- Unbuffered memory is generally for consumer/workstation PCs, not all servers.
- Can be taller than some low-profile RAM, potentially impacting CPU cooler clearance.
Setup, Compatibility & Care
Setup:
- Ensure your PC is powered off and unplugged.
- Open your computer case and locate the RAM slots on the motherboard.
- Align the notch on the memory module with the notch in the RAM slot.
- Press down firmly on both ends of the module until the clips on either side snap into place.
- Repeat for the second module, typically installing them in the recommended slots for dual-channel operation (refer to your motherboard manual).
- Close the case, reconnect power, and boot your system.
- Access your motherboard's BIOS/UEFI and enable the XMP 2.0 profile for optimal performance.
Compatibility:
- This is a DDR4 memory kit and requires a motherboard with DDR4 RAM slots.
- For XMP 2.0 functionality, ensure your motherboard BIOS supports it. Check your motherboard manufacturer's website for compatibility lists.
- RGB synchronization requires a motherboard with compatible RGB control software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light, ASRock Polychrome Sync). Check G.SKILL's website for the latest software compatibility.
Care:
- Avoid touching the gold contacts on the memory modules.
- Handle modules by the edges or the green PCB.
- Keep the modules in a clean, dry environment, away from static electricity.
- Ensure adequate airflow within the PC case to keep the heatsinks cool.