G.Skill Ripjaws - 8 GB - 2666 MHz - DDR4 - SO-DIMM
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The G.Skill Ripjaws 8GB DDR4 SO-DIMM is an ideal upgrade for users looking to improve the multitasking and gaming performance of their compatible laptops or small form factor (SFF) PCs. Featuring a 2666 MHz clock speed and energy-efficient 1.2V operation, it provides a stable performance boost through high-quality, hand-picked components; however, users should ensure their system supports 2666 MHz memory speeds to fully utilize this module's potential.
All features
| Series | Ripjaws |
|---|---|
| Model Part Number | F4-2666C19S-8GRS |
| Brand | G.Skill |
Extended Product Information
FAQs
Will this work in my desktop computer?
This is a SO-DIMM module, which is intended for laptops and small form factor PCs. It will not fit in a standard desktop motherboard.
What happens if I mix this with my current RAM?
The system will typically default to the speed and latency of the slowest module installed. For best performance, it is recommended to use modules with identical specifications.
Do I need to change any settings for it to work?
The system should detect it automatically, but you should enter your BIOS to ensure the Intel XMP 2.0 profile is enabled for optimal performance.
Is there a warranty?
Yes, all G.Skill memory products come with a limited lifetime warranty.
Does this module support dual-channel mode?
If your laptop has two SO-DIMM slots and you install two identical modules, the system will support dual-channel memory configuration.
Troubleshooting
System fails to boot after installation
Ensure the module is fully seated and the side clips are clicked into place. Try reseating the module if the issue persists.
Memory is running at a lower speed than 2666 MHz
Access the BIOS and check if the XMP profile is enabled. Also, verify that your motherboard and CPU chipset actually support 2666 MHz speeds.
System crashes or Blue Screens (BSOD)
Run a memory diagnostic tool like MemTest86 to check for hardware errors, or try testing the module in a different compatible laptop.
Pros and Cons
Pros
- Cost-effective performance upgrade
- Highly energy-efficient design
- Stringent quality testing and binning
- Easy installation for SFF and laptop systems
- Includes Intel XMP 2.0 profile for simple tuning
Cons
- Not compatible with desktop motherboards using standard DIMM slots
- Speed may be throttled if the motherboard has a lower maximum supported memory frequency
- Single 8GB stick may not be enough for high-end video editing workflows
Setup, Compatibility & Care
Before installation, ensure your computer is powered off and unplugged from any power source. Open your device's back panel or chassis according to your manufacturer's manual. Locate the existing RAM slots and gently press down on the metal clips to release the current module if necessary. Align the notch on the G.Skill Ripjaws module with the ridge in the SO-DIMM slot and press firmly until the clips snap into place. Upon booting, enter your BIOS/UEFI to verify the memory is detected and enable the XMP profile to ensure it operates at its rated 2666 MHz speed. Handle the module only by its edges to prevent static discharge or oil transfer to the gold contacts.