1 Way In 2 Way Out Quick Wire Connector Splitter - TIGER POWER SUPPLIES - TGR-QC-1-2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps electricians and DIY enthusiasts understand and effectively use the TIGER POWER SUPPLIES 1 Way In 2 Way Out Quick Wire Connector Splitter (TGR-QC-1-2). This connector simplifies wiring tasks by providing a screwless, lever-based connection, significantly reducing installation time. However, ensure the wire gauge is within the specified range for optimal performance.
All features
| Model Part Number | TGR-QC-1-2 |
|---|---|
| Brand | TIGER POWER SUPPLIES |
Extended Product Information
FAQs
What wire gauges are compatible with this connector?
This connector is compatible with wires ranging from 0.08mm² to 2.5mm² (28AWG to 12AWG).
What is the rated voltage and current?
The connector is rated at 250V AC and 32A.
How do I install the wires?
Strip the wire to 9mm, open the lever, insert the wire fully, and close the lever.
Can I use this connector outdoors?
This connector is designed for indoor use. Protect from moisture and direct sunlight.
How do I remove a wire from the connector?
Open the lever, and gently pull the wire out.
What is the country of origin?
China.
Troubleshooting
Wire not making a good connection.
Ensure the wire is stripped to the correct length (9mm) and inserted fully into the connector. Check that the lever is securely closed.
Connector overheating.
Reduce the load on the circuit. Check that the wire gauge is within the specified range. If the issue persists, replace the connector.
Pros and Cons
Pros
- Fast and easy installation due to the screwless design.
- Wide wiring range, supporting various wire gauges.
- Compact size allows for use in tight spaces.
- High current rating ensures reliability in demanding applications.
- Simplifies circuit branching with two outputs.
Cons
- Requires wires to be stripped to the correct length (9mm).
- May not be suitable for very large gauge wires outside of the specified range.
- Ensure compatibility with existing wiring setups.
Setup, Compatibility & Care
- Preparation: Ensure the power is off before starting. Prepare the wires by stripping them to a 9mm length.
- Insertion: Open the lever on the connector. Insert the stripped wire fully into the designated input or output hole.
- Connection: Close the lever to secure the connection. Ensure the wire is firmly held.
- Compatibility: This connector is compatible with copper wires within the specified gauge range (0.08mm² to 2.5mm² or 28AWG to 12AWG).
- Care: Avoid overloading the connector beyond its rated current (32A). Inspect the connections periodically for any signs of damage or loosening. Clean with a dry cloth.