VEVOR Adjustable Desk Legs - Black - 28 Inch
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The VEVOR Adjustable Desk Legs are ideal for DIY enthusiasts, furniture makers, and professionals looking to build custom, high-capacity workspaces or dining surfaces. These 28-inch legs offer a massive weight capacity of 1200 pounds, ensuring extreme stability for heavy-duty tables, though the fixed height requires careful planning during the design phase as they lack telescopic height adjustments.
All features
| Colour | Black |
|---|---|
| Model Part Number | Gambe per scrivania regolabili T10570-28 |
| Brand | VEVOR |
Extended Product Information
FAQs
Can these legs be used outdoors?
While the powder coating is corrosion-resistant, it is designed primarily for indoor use. Outdoor usage in high-humidity or rainy areas may eventually lead to rust.
What is the total height of these legs?
These legs have a fixed height of 28 inches.
Do I need special tools to install them?
A standard power drill and a screwdriver bit are all that is required for installation.
Can I use these legs on a glass tabletop?
No, these legs are designed to be screwed into a solid substrate like wood. They are not compatible with glass.
Are the mounting screws included?
Yes, each set includes the necessary self-tapping screws for mounting the legs to your tabletop.
Troubleshooting
Table wobbles on uneven floor
Adjust the threaded leveler at the bottom of the foot pad to compensate for floor height differences.
Screws feel loose in the tabletop
The screws may have stripped the pilot hole in the wood. Remove the screw, fill the hole with wood filler or a wooden dowel, and re-drill a smaller pilot hole before re-inserting.
Pros and Cons
Pros
- Supports an industry-leading 1200-pound load
- Durable powder-coated finish resists corrosion
- Includes protective rubber feet for floor safety
- Pre-marked mounting plates ensure easy alignment
Cons
- Height is fixed at 28 inches without adjustment
- Requires a solid wood base for maximum screw retention
- Weight of the legs adds significantly to overall desk weight
Setup, Compatibility & Care
- Preparation: Place your tabletop face down on a clean, soft surface to prevent scratching during installation.
- Positioning: Measure the distance from each corner to ensure the mounting plates are centered according to your design preferences.
- Mounting: Use a power drill to guide the screws into the pre-marked holes on the mounting plates. If using hardwood, it is recommended to drill a small pilot hole first.
- Final Check: Ensure all screws are tightened flush to the metal plate.
- Maintenance: Periodically wipe the legs with a damp cloth and mild detergent. Avoid harsh chemical cleaners that may strip the powder coating. Inspect the rubber foot pads annually to ensure they have not worn down or moved out of alignment.