Laser Tools Adjustable Tap Socket - M4 - M14 - 8029
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Laser Tools adjustable tap socket (M4-M14, model 8029) is designed for professional mechanics and DIY enthusiasts who need a versatile tool for driving taps, reamers, and screw extractors. Its key benefit is the adjustable collet system that securely grips a wide range of square shank tools. A potential caveat is that it requires a 3/8" drive socket wrench for operation, meaning you need an additional tool to use it.
All features
| Model Part Number | 8029 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
What is the maximum tap size this socket can handle?
The socket is designed to handle taps from M4 up to M14, including equivalent imperial sizes.
Can this tool be used with reamers?
Yes, it is ideal for driving reamers that have a square shank measuring between 5mm and 8mm across the flats.
What drive size is required to operate this socket?
You need a standard 3/8" drive socket wrench or extension to operate this tool.
How does the tool ensure a secure grip on different taps?
It features stepped check collets that are adjustable, allowing them to securely grip a wider range of square shank sizes for taps, reamers, and screw extractors.
Is this tool suitable for left-hand taps?
The product description does not specify compatibility with left-hand taps. It is designed for standard thread cutting and extraction where a clockwise rotation is applied.
What are the dimensions of the square shank it can hold for reamers/extractors?
It can accommodate square shanks from 5mm up to 8mm across the flats.
Troubleshooting
Tap not gripping securely
Ensure the tap's square shank is fully inserted into the collet. Tighten the knurled collar firmly. If the shank is worn or significantly smaller than the collet's range, consider using a shim or a different tool.
Difficulty turning the tap
Check that the tap is aligned correctly with the workpiece and cutting straight. Ensure you are using sufficient lubrication. Verify that the tap itself is sharp and not damaged. The socket wrench may also need more leverage; ensure it's securely attached.
Socket wrench slipping on the tap socket drive
Inspect the 3/8" drive ends of both the tap socket and the socket wrench for wear or damage. Ensure the socket wrench is fully seated onto the drive. If damage is present, consider replacing the worn component.
Pros and Cons
Pros
- Versatile application for taps, reamers, and extractors.
- Wide range of thread sizes covered (M4-M14).
- Secure grip due to stepped collet design.
- Integrates with standard 3/8" drive tools.
- Robust build quality for frequent use.
Cons
- Requires a separate 3/8" drive socket wrench.
- Maximum square shank size for reamers/extractors is 8mm.
- May not be suitable for very delicate or high-precision threading tasks without careful handling.
Setup, Compatibility & Care
Setup: To use the tap socket, select the appropriate size tap. Insert the square shank of the tap into the collet jaws of the socket. Ensure the jaws are tightened securely around the tap shank by rotating the knurled collar. Then, attach a 3/8" drive socket wrench to the drive end of the tap socket. Apply steady, even pressure as you turn the wrench to cut the thread.
Compatibility: This tool is compatible with:
- Thread taps ranging from M4 to M14.
- Imperial taps with equivalent thread forms.
- Reamers and screw extractors with square shanks from 5mm up to 8mm across the flats.
- Any standard 3/8" drive socket wrench or extension.
Care: After use, clean the collets and drive end of any debris. A light application of oil can prevent rust, especially in damp environments. Store the socket in a dry place, preferably in a toolbox or organizer to protect it from damage.