Sealey Wall Mounting Heater 2000W - IWMH2000R
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Sealey Wall Mounting Heater 2000W (Model IWMH2000R) is designed for users needing efficient, clean heating in industrial or domestic outdoor spaces. Its key benefit is providing rapid, dry heat without condensation, gas, or fumes, utilizing an infrared bulb with a HeLeN coating for reduced glare. A potential caveat is its outdoor-only use requirement.
All features
| Model Part Number | IWMH2000R |
|---|---|
| Brand | Sealey |
Extended Product Information
FAQs
Can this heater be used indoors?
No, this heater is rated for outdoor use only (IP55) and should not be operated in indoor environments.
What is the purpose of the HeLeN coating?
The HeLeN coating on the infrared bulb is designed to reduce glare, providing a more comfortable heat experience without excessive brightness.
What is the IP rating of this heater?
The heater has an IP55 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction.
Does it come with a remote control?
Yes, the heater comes with a remote control for convenient operation. However, the batteries for the remote control are not included.
How far should the heater be mounted from flammable materials?
It is recommended to maintain a minimum clearance of 1 meter from any flammable materials.
What are the dimensions of the heater?
The heater dimensions are approximately 625mm (width) x 72mm (depth) x 105mm (height).
Can I adjust the heat output?
Yes, the heater has dual power settings, allowing you to choose between 1000W and 2000W.
Troubleshooting
Heater does not turn on
Check that the power cord is securely plugged into a working outlet. Verify the remote control batteries are correctly inserted and functional. Ensure the main power switch is in the 'on' position.
Low heat output
Confirm the heater is set to the 2000W setting. Ensure the reflector and bulb are clean and free from dust or obstructions. Check that the environment is not excessively large for the heater's capacity.
Remote control not working
Replace the batteries in the remote control. Ensure there are no obstructions between the remote and the heater. Check that the heater is powered on.
Pros and Cons
Pros
- Provides clean, dry heat with no fumes or condensation.
- Quickly reaches operating temperature for immediate warmth.
- High-efficiency reflector maximizes heat output.
- Flexible control options via push switch or remote.
- Suitable for various industrial and domestic outdoor applications.
- Includes mounting hardware for easy installation.
Cons
- Strictly for outdoor use only.
- Remote control batteries are not included.
- Single bulb design may be less versatile for varied heating needs compared to multi-element heaters.
Setup, Compatibility & Care
Setup:
- Choose a suitable outdoor location, ensuring it is at least 1 meter away from flammable materials.
- Use the provided mounting brackets and fixings to securely attach the heater to a wall or post. Ensure the mounting surface is stable.
- Connect the heater to a suitable power source.
- Install batteries into the remote control (if using).
Compatibility:
- Requires a standard mains power supply.
- IP55 rating ensures resistance to dust and low-pressure water jets, suitable for outdoor environments.
Care:
- Ensure the heater is switched off and unplugged before cleaning.
- Wipe the exterior and reflector with a soft, damp cloth. Avoid abrasive cleaners.
- Periodically check the power cord for damage.
- Keep the heater free from dust and debris, especially around the bulb and reflector.