Shopping.co.uk

Shark Robot Vacuum - PowerDetect

Not AvailableShark Robot Vacuum - PowerDetect
Not Available
Not Available

Discover the ultimate in automated home cleaning with the Shark ThermaCharged PowerDetect Robot Va...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Shark RV2900XEUKWH Robot Vacuum is designed for busy households seeking effortless automated cleaning. Its key benefit is a comprehensive cleaning and self-maintenance system, including a heated mop-cleaning base and automatic debris disposal, offering up to a month of hands-free operation. A potential caveat is its 0.3L dust capacity, which may require more frequent emptying for larger homes. This intelligent robot vacuum and mop system features Dirt Detect and Floor Detect for optimized suction, Edge Detect for thorough corner cleaning, and NeverStuck Charged Technology for seamless navigation over obstacles.

All features

ColourWhite
SeriesPowerDetect
Model Part NumberWYR1P
BrandShark

Extended Product Information

FAQs

How often should I empty the dustbin?

The robot can hold 0.3 L of dust. If you have pets or a particularly dusty environment, you may need to empty it more frequently. The base station is designed for automatic debris disposal, which can handle disposal for up to a month depending on usage and debris volume.

Can this robot vacuum clean carpets and hard floors?

Yes, the Shark RV2900XEUKWH is designed to clean both carpeted areas and hard floors. It automatically adjusts suction power for different surfaces and lifts its mop when crossing carpets.

What is the ThermaCharged cleaning base for?

The ThermaCharged base hygienically washes and dries the mopping pads using 85°C water and 80°C air after each cleaning cycle, ensuring they are clean and ready for the next use and preventing odors.

How long does the battery last, and how long does it take to charge?

The robot provides up to 120 minutes of runtime on a single charge and takes approximately 4 hours to fully recharge.

Do I need to use a special cleaning solution?

Yes, it is recommended to use Shark cleaning solutions specifically designed for this robot vacuum and mop system to ensure optimal performance and prevent damage to the device or your floors.

Can I control the robot without a smartphone?

While smartphone control via the SharkClean app is the primary method for advanced features like scheduling, room mapping, and remote operation, some basic functions may be available via voice commands if integrated with compatible smart home assistants, depending on regional availability and setup.

What is the warranty period for this robot vacuum?

Please refer to the product documentation or the manufacturer's website for the most current warranty information, as it can vary by region and retailer.

Troubleshooting

Robot does not start cleaning

Ensure the robot is properly docked and charging. Check if the battery is charged. Verify that the cleaning schedule is correctly set in the app or that a manual start command has been issued.

Robot gets stuck frequently

Check for potential obstacles or cluttered areas in the cleaning path. Ensure the 'NeverStuck Charged Technology' is functioning correctly by cleaning its sensors. Map your home in the app to define no-go zones if necessary.

Poor suction power

Clean or replace the filter. Check the dustbin for fullness and empty it. Ensure there are no blockages in the brush roll or intake. Clean the sensors.

Mop is not cleaning effectively or is leaving streaks

Ensure the mopping pad is correctly attached and damp. Check the water tank level. Clean the ThermaCharged base's water reservoirs and ensure the mop pad is being heated and washed properly. Use the recommended cleaning solution.

Robot not returning to the base station

Ensure the base station is properly positioned with adequate clearance and connected to power. Clean the charging contacts on both the robot and the base. Remove any obstructions between the robot and the base.

Wi-Fi connection issues

Verify that your Wi-Fi network is operational and that the robot is within range. Ensure you are connecting to a 2.4 GHz network. Restart your router and the robot, then try reconnecting through the app.

Pros and Cons

Pros

  • Comprehensive self-cleaning and maintenance features (mop washing, dust disposal, water refills)
  • Intelligent navigation and cleaning adjustments (Dirt Detect, Floor Detect, Edge Detect)
  • Hands-free operation for extended periods (up to a month)
  • Effective on multiple floor types, including carpets and hard floors
  • Good battery life and cleaning coverage on a single charge

Cons

  • Dust capacity of 0.3L may require frequent emptying in larger homes
  • Initial setup and app configuration might require some user attention
  • Mopping effectiveness on heavily soiled floors may vary
  • The unit is relatively large due to the self-emptying and cleaning base
  • Does not include a remote control, relying solely on app or voice commands

Setup, Compatibility & Care

Initial Setup:

  1. Unpack all components: robot vacuum, charging base, power cord, side brushes, cleaning solution, and mopping pad.
  2. Place the NeverTouch Pro Base on a level surface against a wall, ensuring adequate clearance around it as specified in the manual.
  3. Connect the power cord to the base and plug it into a power outlet.
  4. Install the side brushes onto the robot's underside.
  5. Place the robot onto the charging base to initiate the first charge. Allow it to charge fully before the first use (approximately 4 hours).
  6. Download the SharkClean app on your smartphone or tablet and follow the on-screen instructions to connect the robot to your Wi-Fi network and set up your cleaning preferences and room mapping.

Compatibility:

  • Floor Surfaces: Suitable for both hard floors (tile, wood, laminate) and carpets.
  • Wi-Fi Network: Requires a 2.4 GHz Wi-Fi network for app connectivity and smart features.
  • Cleaning Solution: Use only Shark cleaning solutions recommended for the device to avoid damage.

Care and Maintenance:

  • Dustbin: Empty the dustbin regularly, or when indicated by the base station if it features automatic disposal. Clean the bagless dust container and filter as needed.
  • Filters: The washable fabric pre-motor filter should be cleaned regularly according to the user manual to maintain suction power.
  • Mopping Pads: The anti-microbial mopping pads are designed for use with the ThermaCharged base. Follow instructions for cleaning or replacement.
  • Sensors & Brushes: Keep sensors clean using a dry cloth. Remove any hair or debris wrapped around the brushes.
  • Base Station: Periodically clean the charging contacts on both the robot and the base. Ensure the water tanks in the base are clean and free of debris.