Regin Fan Assembly Oiler - REGZ22
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Regin Fan Assembly Oiler (REGZ22) to maintain and prevent fan failures. The key benefit is the prevention of fan seizing due to the lubricating properties of the oil, ensuring smooth operation. Keep in mind that this oiler is specifically designed for fan assemblies and may not be suitable for other applications.
All features
| Model Part Number | REGZ22 |
|---|---|
| Brand | Regin |
Extended Product Information
FAQs
How often should I apply the oil?
Apply the oil every 6-12 months, or as needed, depending on the operating conditions of the fan.
What type of oil is used in this oiler?
The oiler is filled with Unocal 76 turbine oil.
Can I use this oil on other equipment?
While the oil may be suitable for other applications, this oiler is specifically designed for fan assemblies. Always consult the manufacturer's recommendations for your equipment.
Is the spout replaceable?
The spout is part of the oiler assembly and is not designed to be individually replaced. However the telescoping feature can allow access to hard to reach parts.
What is the flash point of the oil?
The flash point is 210°C.
Where can I purchase a replacement oiler?
Contact your local supplier of Regin products.
Troubleshooting
Fan still seizing after application.
Ensure oil is applied to all moving parts. If seizing continues, the fan may have other mechanical issues or need to be replaced.
Oil leaking from the oiler.
Check the spout for damage and ensure the cap is securely fastened.
Pros and Cons
Pros
- Prevents fan seizing, extending the life of fan assemblies.
- Provides reliable lubrication for optimal fan performance.
- Flexible spout allows for precise application of oil in hard-to-reach areas.
- Non-conductive spout ensures safety during application.
Cons
- Designed specifically for fan assemblies; may not be suitable for other applications.
- Limited information on the specific viscosity grade of the Unocal 76 turbine oil.
Setup, Compatibility & Care
- Preparation: Ensure the fan is turned off and the area is safe for maintenance.
- Application: Extend the telescoping spout and carefully apply the oil to the fan bearings and any other moving parts.
- Wipe Excess: Wipe away any excess oil to prevent the accumulation of dirt and debris.
- Compatibility: This oil is compatible with most fan assembly components.
- Storage: Store the oiler in a cool, dry place away from direct sunlight and extreme temperatures.
- Safety: Avoid contact with skin and eyes. If contact occurs, rinse thoroughly with water.