Victron Energy Orion-Tr Smart DC-DC Charger - 12/24V 15A 360W
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Victron Energy Orion-Tr Smart DC-DC charger (ORI122436120) is for vehicle and boat owners needing to reliably charge a secondary battery system from their primary alternator and start battery. Its key benefit is providing a stable, adaptive 3-stage charge to service batteries, ensuring longevity and performance, even in demanding environments. A potential caveat is its reliance on the VictronConnect app for advanced programming, requiring a compatible smartphone or tablet.
All features
| Model Part Number | ORI122436120 |
|---|---|
| Brand | Victron Energy |
Extended Product Information
FAQs
What is the primary purpose of the Orion-Tr Smart DC-DC charger?
Its primary purpose is to charge a secondary (service) battery bank from the primary (start) battery and alternator in vehicles or boats, ensuring the service battery remains charged without draining the start battery.
Can I connect multiple Orion-Tr Smart chargers together?
Yes, multiple units can be connected in parallel to increase the total output current to charge larger battery banks more quickly.
What types of batteries can this charger charge?
It is compatible with both lead-acid (sealed, gel, flooded) and lithium (LiFePO4) batteries.
Do I need a special cable to program the charger?
No, programming and monitoring are done wirelessly via Bluetooth using the VictronConnect App on a compatible smartphone or tablet.
How does the charger know when to start and stop charging?
It can be configured to start charging when it detects the engine is running (via voltage or ignition signal) and stop when the engine is off. It also features adjustable voltage thresholds.
What is the maximum operating temperature for this charger?
The Orion-Tr Smart charger can maintain its full rated output current up to an ambient temperature of 40°C (104°F).
What is the continuous output current of this specific model (ORI122436120)?
This model provides a continuous output current of 15A at its nominal output voltage and 40°C ambient temperature.
Troubleshooting
Charger not turning on or charging.
Verify input voltage is within the 10-17V range. Check all wiring connections for security and correct polarity. Ensure fuses are intact. Confirm engine running detection or remote switch is correctly wired and activated.
Intermittent charging or low output.
Check for loose connections or high resistance in wiring. Ensure the unit is not overheating; check ambient temperature and ventilation. Verify battery voltage is within acceptable range for charging to commence.
Bluetooth connection fails.
Ensure Bluetooth is enabled on your smartphone/tablet. Move closer to the charger. Close and reopen the VictronConnect app. Restart your mobile device. Check for firmware updates for the charger via the app when a connection is possible.
Battery not reaching full charge.
Confirm the correct battery type and charge profile are selected in the VictronConnect App. Check for excessive current draw from the service battery while charging. Ensure the input voltage from the alternator is stable and sufficient.
Pros and Cons
Pros
- Reliable and efficient charging for dual battery systems.
- Advanced features controllable via a user-friendly mobile app.
- Robust design suitable for high-temperature environments.
- Supports a wide range of battery chemistries (lead-acid and lithium).
- Scalable output by connecting units in parallel.
Cons
- Requires a smartphone/tablet with Bluetooth for full programming.
- Installation requires basic electrical knowledge and wiring.
- May be overkill for very simple dual battery setups.
- Output current is limited to 15A continuous at 40°C.
Setup, Compatibility & Care
Setup:
- Mounting: Securely mount the charger in a well-ventilated area, ensuring it is protected from excessive moisture and vibration.
- Wiring: Connect the input terminals to the start battery and alternator system. Connect the output terminals to the service battery bank. Ensure proper wire gauge and fuse protection.
- Control Input: Connect the remote on/off or engine running detection wires as per the installation manual.
- Programming: Download the VictronConnect App. Enable Bluetooth on your device and pair with the Orion-Tr Smart charger. Follow app prompts to set battery type, charge parameters, and other settings.
Compatibility:
- Input Voltage: Compatible with 10-17V input systems (typical for 12V vehicles).
- Output Voltage: Adjustable from 20-30V, suitable for charging various 12V and 24V battery systems (ensure correct configuration).
- Battery Types: Supports sealed lead-acid, gel, flooded lead-acid, and lithium (LiFePO4) batteries.
Care:
- Regularly inspect wiring connections for corrosion or looseness.
- Keep the unit clean and free of dust and debris, especially ventilation slots.
- Periodically check battery health and charging status via the VictronConnect App.