Soudal Artificial Grass Adhesive - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professional installers looking for a reliable adhesive for artificial grass. Its key benefit is a strong, permanently flexible bond suitable for both indoor and outdoor use. A caveat to consider is that it is specifically formulated for artificial grass and may not be suitable for other applications.
All features
| Colour | Green |
|---|---|
| Model Part Number | 154630 |
| Brand | Soudal |
Extended Product Information
FAQs
Can this adhesive be used for indoor artificial grass carpet?
Yes, the adhesive is suitable for both indoor and outdoor applications on various surfaces.
How long does the adhesive take to cure?
Curing times vary based on temperature, humidity, and application thickness. Refer to the product's technical data sheet for specific estimates.
Is the adhesive waterproof after curing?
The adhesive is designed for outdoor use and offers good resistance to moisture once fully cured.
What surfaces can I use this adhesive on?
It adheres well to most common surfaces, including concrete, wood, and composite materials, provided they are clean and dry.
Do I need to mix the adhesive before use?
No, this is a ready-to-use product and does not require mixing.
Will the green colour be visible after installation?
The green colour is designed to blend in with the backing of artificial grass for a discreet finish. However, it's always best to test on a small, inconspicuous area first.
Troubleshooting
Adhesive not bonding properly
Ensure surfaces were thoroughly cleaned and dried before application. Check that the adhesive was applied evenly and sufficient pressure was applied to the grass. Verify ambient temperature is within the recommended application range.
Slow curing time
Curing time is dependent on temperature and humidity. Cooler or more humid conditions will slow down the process. Ensure adequate ventilation. Avoid stressing the bond until fully cured.
Adhesive showing through the grass
Ensure the adhesive was applied thinly and evenly, and that the green colour is suitable for the specific artificial grass. Some grass types may require a different application method or colourless adhesive.
Pros and Cons
Pros
- Easy to apply straight from the container.
- Offers a long-lasting, flexible bond.
- Suitable for a wide range of weather conditions.
- Provides a neat finish due to its green colour.
- Strong adhesion on various substrates.
Cons
- Primarily designed for artificial grass applications.
- Curing time can be affected by temperature and humidity.
- Requires a clean, dry surface for optimal adhesion.
Setup, Compatibility & Care
Setup: Ensure the surfaces to be bonded are clean, dry, and free from dust, grease, and other contaminants. Apply the adhesive using a suitable applicator (e.g., a notched trowel or a bead dispenser) in a consistent pattern according to the artificial grass manufacturer's recommendations. Press the artificial grass firmly into the adhesive.
Compatibility: This adhesive is specifically designed for bonding artificial grass to various substrates commonly used in outdoor and indoor installations. It is compatible with most backing materials of artificial grass and common construction surfaces like concrete, wood, and certain plastics.
Care: Once cured, the adhesive requires minimal care. However, avoid applying excessive weight or stress to the bonded area during the initial curing period. For maintenance of the artificial grass itself, follow the grass manufacturer's guidelines.