Shopping.co.uk

Sealey ElectroStart Batteryless Power Start 800A - Sealey - E/START800

Not AvailableSealey ElectroStart Batteryless Power Start 800A - Sealey - E/START800
Not Available
Not Available

Sealey 12V ElectroStart® Batteryless Power Start 800A --Output: 800A (Peak), 400A (EN). --Innovat...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for users of the Sealey ElectroStart 800A, a batteryless power start unit designed for 12V vehicles. The key benefit is its ability to jump-start vehicles without an internal battery, eliminating the need for long charging times. However, users should be aware that the unit requires a power source to energize before use. This guide covers the key features, setup, usage, and troubleshooting of the Sealey ElectroStart 800A.

All features

Model Part NumberE/START800
BrandSealey

Extended Product Information

FAQs

How long does it take to energize the unit?

The ElectroStart 800A can be fully energized in approximately 2 minutes.

What voltage vehicles can this jump starter be used on?

The Sealey ElectroStart 800A is designed for use on 12V vehicles.

Does it have an internal battery?

No, it uses innovative patented technology and has no internal battery.

Can I use it as a battery charger?

It can be used as a 0.8A battery maintainer via USB (cable not included). It can also be used with a 2A battery charger with the addition of Model No. E/START2A Charging Adaptor (not included).

What is the peak output?

The peak output is 800A.

What is the warranty period?

The ElectroStart 800A comes with a 2-year guarantee.

What should I do if the vehicle still doesn't start?

Check the connections again, ensure the ground connection is secure, and check the vehicle's battery for other issues.

Troubleshooting

Unit will not energize.

Ensure the ElectroStart 800A is connected to a power source and that the power source is working properly.

Vehicle doesn't start after jump-starting.

Check the clamp connections for secure contact and ensure they are connected to the correct terminals. Allow a few minutes before attempting to start the vehicle again.

Digital display shows an error.

Consult the user manual for specific error codes and troubleshooting steps. Contact Sealey support if necessary.

Pros and Cons

Pros

  • No internal battery means no long charging times.
  • Compact and lightweight design for easy handling.
  • Safe and simple to use.
  • Digital display for clear status monitoring.
  • Can be used as a battery maintainer.

Cons

  • Requires an external power source to energize before use.
  • USB charging cable and charging adaptor not included.
  • Limited to 800A peak output.

Setup, Compatibility & Care

  1. Preparation: Ensure the ElectroStart 800A is fully energized before use. Connect it to a power source for approximately 2 minutes.
  2. Connection: Connect the red clamp to the positive (+) terminal of the dead battery and the black clamp to a suitable ground point on the vehicle's chassis.
  3. Starting: Attempt to start the vehicle. If it doesn't start, wait a few minutes and try again.
  4. Compatibility: This unit is designed for 12V vehicles.
  5. Care: Store the unit in a dry place. Clean the clamps regularly to ensure good contact. Do not disassemble the unit.
  6. Charging: To use as a maintainer, connect using a USB cable (not included).
  7. Charger: Can use a 2A charger with Model No. E/START2A Charging Adaptor (not included).