Gorilla Strong Adhesive - Liquid 2 x 3g - Gel 15g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Gorilla Strong Adhesive set is an essential toolkit for DIY enthusiasts, homeowners, and crafters who need a reliable way to bond various materials including wood, metal, plastic, and ceramics. By combining two distinct 3g liquid tubes for intricate work and a 15g gel tube for gap-filling tasks, this set offers both precision and heavy-duty strength; however, users should be careful to handle these fast-acting adhesives with care to avoid skin contact and ensure proper surface alignment before bonding.
All features
| Brand | Gorilla |
|---|
Extended Product Information
FAQs
Can I use this on glass?
Yes, the Gorilla Strong Adhesive is effective on many glass projects, though it should not be used on items that will be submerged in water or subjected to extreme heat.
How long does it take to cure fully?
While the bond is set within seconds, it is recommended to wait 24 hours for a full, maximum-strength cure.
Is this adhesive food safe?
No, this product is not intended for use on items that come into contact with food or beverages.
Does the gel formula work on wood?
Yes, the gel formula works exceptionally well on wood, particularly for joints where there might be small gaps to fill.
What happens if I get it on my skin?
If the adhesive bonds to your skin, do not pull it apart. Soak the area in warm, soapy water and gently peel the skin apart. Consult a doctor if the irritation persists.
Troubleshooting
The liquid tube nozzle is clogged.
The anti-clog cap is designed to prevent this; if it does occur, ensure the cap is tightened correctly. Do not attempt to force the tip open with sharp objects, as this may puncture the tube body.
The bond did not hold.
Ensure that the surfaces were clean and free of oils or dust before application. Also, verify that the surfaces have 100% contact area, as the adhesive needs a tight fit to create a lasting bond.
Glue spilled on surrounding areas.
If the adhesive is still wet, use a small amount of acetone or nail polish remover to gently wipe it away. Once cured, the glue is highly resistant, so manual scraping or sanding may be required.
Pros and Cons
Pros
- Versatile range of formulas for different tasks
- Anti-clog technology extends the shelf life of liquid tubes
- Dries clear for a seamless, professional-looking repair
- Impact-resistant formula ensures bond longevity
- Effective on a wide variety of household and craft materials
Cons
- Fast-setting time leaves little room for repositioning
- Requires careful handling to prevent skin bonding
- Gel formula requires slightly longer curing time than liquid
- Not suitable for use on polyethylene or polypropylene plastics
Setup, Compatibility & Care
To achieve the best results, start by sanding glossy surfaces lightly to improve adhesion. For the liquid tubes, press down firmly until you hear the click of the seal, then apply a small amount to one surface and press together for 15-30 seconds. For the gel, dispense a controlled amount onto the surface and clamp or hold steady for at least 60 seconds.
Compatibility Note: While it works on most woods, metals, and plastics, it is not recommended for use on polyethylene (PE) or polypropylene (PP). Always store the tubes in an upright position in a cool, dry place. After each use, wipe the nozzle of the gel tube with a dry cloth and ensure the liquid cap is tightened securely to maintain the anti-clogging feature.