Liberon Liquid Wax Polish - Black Bison - 500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Liberon Black Bison Liquid Wax Polish is designed for anyone looking to nourish and protect their wooden furniture and surfaces. Its key benefit is restoring and maintaining the natural beauty of wood with a protective, conditioning finish. A potential caveat is the need for adequate ventilation during application due to the wax's properties.
All features
| Model Part Number | 069960 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
Is this wax suitable for all wood finishes?
Yes, it is suitable for most wood finishes, including bare wood, oiled, and previously waxed surfaces. It is not recommended for high-gloss lacquered or polyurethane finishes.
How often should I reapply Liberon Liquid Wax?
The frequency depends on the item's use and environment. Typically, reapplication every 6 to 12 months is sufficient to maintain protection and appearance.
Can I use this on painted wood?
It is best used on bare or stained wood. While it might offer some protection to sealed paint, it can alter the sheen and may not adhere well. Test on an inconspicuous area first.
Does the wax leave a strong smell?
Liberon Black Bison waxes are known for their characteristic beeswax scent, which is generally pleasant and dissipates as the wax cures.
How much product should I use per application?
A little goes a long way. Apply sparingly with a cloth, ensuring an even, thin coat. Over-application can lead to a sticky finish and difficulty buffing.
What is the best way to buff the wax?
Use a clean, soft, lint-free cloth or a dedicated buffing pad. Buff with firm pressure in circular motions or following the grain until a desired sheen is achieved.
Can I use this on cutting boards or food surfaces?
This product is intended for furniture and decorative wood. For food-contact surfaces, it is recommended to use food-safe oils or waxes.
Troubleshooting
Wax appears streaky or uneven.
Ensure the wax was applied sparingly and evenly. Buff more vigorously with a clean cloth to remove excess and blend the finish. For significant streaking, you may need to apply a little more solvent-based cleaner to the area and reapply the wax carefully.
Wood surface remains dull after buffing.
The surface may not have been buffed long or vigorously enough. Use a clean, dry, soft cloth and buff with firm pressure until the desired sheen is achieved. Ensure the wax was allowed to dry sufficiently before buffing.
Wax leaves a white or cloudy residue.
This can happen if too much wax was applied or if it was applied in a cold environment. Use a cloth dampened with mineral spirits or turpentine to gently remove the residue, then reapply a thin, even coat of wax and buff thoroughly.
Wood feels sticky after application.
Too much wax was applied, or it did not dry properly. Buff the surface with a clean cloth to remove excess. If stickiness persists, use a cloth lightly dampened with solvent and buff again. Ensure good ventilation during application and drying.
Pros and Cons
Pros
- Effectively nourishes and conditions wood.
- Restores a natural sheen and highlights wood grain.
- Provides a protective layer against everyday wear.
- Suitable for a wide range of wooden items.
- Simple to apply and buff to a shine.
Cons
- Requires proper ventilation during use.
- May darken lighter woods slightly.
- Not suitable for surfaces that require a high-gloss, lacquered finish.
- Can attract dust if not buffed sufficiently.
- Requires reapplication over time for continued protection.
Setup, Compatibility & Care
Compatibility: Liberon Black Bison Liquid Wax Polish is suitable for all types of wood, including finished and unfinished surfaces. It is ideal for furniture, doors, wooden trim, and decorative wooden items. Avoid use on surfaces that are already heavily lacquered or varnished unless the intention is to remove the existing finish first.
Application:
- Ensure the wood surface is clean, dry, and free from dust or grease.
- Apply a small amount of liquid wax to a clean, lint-free cloth.
- Rub the wax evenly into the wood surface, following the direction of the grain.
- Allow the wax to dry for a few minutes until a dulling film appears.
- Buff the surface with a clean, soft cloth or applicator pad to achieve a natural sheen.
Care: Periodically reapply the wax, typically every 6-12 months depending on usage and environmental conditions, to maintain protection and luster. Clean wood surfaces with a dry or slightly damp cloth, avoiding harsh chemicals or abrasive cleaners that could strip the wax finish.