Silverhook Big Boy Epoxy Pro Filler - BIG41
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Silverhook Big Boy Epoxy Pro Filler (BIG41), a two-component putty designed for various applications. It offers easy application and excellent sanding properties, making it ideal for both professionals and DIY enthusiasts. A key benefit is its high elasticity and superior grip on multiple surfaces. Note that proper surface preparation is crucial for optimal results.
All features
| Model Part Number | BIG41 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
What surfaces can I use this filler on?
It is suitable for galvanized steel, aluminum, wood, and rigid plastics.
How long does it take for the filler to cure?
Curing time varies depending on the specific product and environmental conditions, but it generally takes overnight.
Do I need to prime the surface before painting?
Yes, it is recommended to prime the surface after sanding the filler and before painting for the best results.
Can I use this filler outdoors?
Yes, its corrosion-resistant nature makes it suitable for exterior applications.
How should I store the product?
Store in a cool, dry place. Make sure the components are tightly sealed when not in use.
How do I clean the tools after use?
Clean tools immediately after use with an appropriate solvent, following the manufacturer's instructions.
Can I use this filler on plastic car bumpers?
This filler is suitable for rigid plastics, so it may be appropriate, but always test in a small, inconspicuous area first.
Troubleshooting
Filler is not hardening.
Ensure the two components were mixed thoroughly in the correct ratio. Check the expiry date and ensure the product was stored properly.
Filler is difficult to sand.
Allow for the recommended curing time before attempting to sand. Use the appropriate grade sandpaper.
Filler does not adhere to the surface.
Make sure the surface was properly cleaned and prepared. Roughen the surface with sandpaper for better adhesion.
Pros and Cons
Pros
- Easy to apply and sand, saving time and effort.
- Bonds effectively to multiple surfaces, increasing its range of use.
- Provides a durable and long-lasting finish.
- Corrosion-resistant, making it ideal for outdoor applications.
Cons
- Requires proper mixing of the two components for optimal performance.
- Surface preparation is critical for adhesion.
- May require multiple applications for deep imperfections.
- Curing time should be observed.
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean, dry, and free from rust, loose paint, and grease. Sand the surface lightly for better adhesion.
- Mixing: Mix the two components thoroughly according to the manufacturer's instructions until a consistent color is achieved.
- Application: Apply the mixed filler using a spatula or applicator, pressing firmly to fill the imperfections.
- Curing: Allow the filler to cure completely according to the product guidelines before sanding or painting. Overnight curing is often required for complete hardness.
- Compatibility: Suitable for use on galvanized steel, aluminum, wood, and rigid plastics.
- Care: Store in a cool, dry place. Avoid extreme temperatures. Keep the components tightly sealed when not in use. Clean tools immediately after use with an appropriate solvent.