Loops F Type Hex Crimp Connector Plug Thick Coax Cable - CT125 WF125
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for installers and DIY enthusiasts working with coaxial cables, specifically for creating secure and weatherproof F-type connections on thicker cables. The key benefit is a reliable, professional-grade connection for optimal signal integrity, though it requires a specific crimp tool for proper installation. This pack of 100 connectors is designed for CT125/WF125 coaxial cables and similar sizes (7-8mm outer diameter), offering a two-piece construction for robust performance and an outdoor-rated seal.
All features
| Model Part Number | CT125 WF125 |
|---|---|
| Brand | Loops |
Extended Product Information
FAQs
What type of cable is this connector for?
This connector is designed for coaxial cables with an outer diameter of 7-8mm, such as CT125 and WF125.
What tool do I need to install this connector?
You will need a hex crimp tool with a jaw size of 9.5mm for proper installation.
Can I use this connector on RG6 cable?
Yes, if your RG6 cable has an outer diameter within the 7-8mm range, this connector should be compatible.
Is this connector suitable for indoor use only?
No, these connectors are outdoor-rated and designed to withstand various weather conditions.
How many connectors are included in this pack?
This pack contains 100 F-Type Hex Crimp Connectors.
What does 'two-piece' refer to?
The 'two-piece' design means the connector consists of a main body and a separate central pin that are assembled onto the cable.
What is the benefit of a weatherproof seal?
A weatherproof seal protects the electrical connection from moisture and corrosion, ensuring reliable signal transmission and preventing performance degradation over time, especially in outdoor installations.
Troubleshooting
Signal loss or poor picture quality after installation
Verify that the center conductor is correctly seated and that the connector was crimped properly with the correct tool. Check for any damage to the cable during installation.
Connector does not fit the cable
Confirm the coaxial cable's outer diameter. These connectors are for 7-8mm outer diameter cables and will not fit thinner cables.
Connector feels loose or won't crimp properly
Ensure you are using a hex crimp tool with a 9.5mm jaw size. Check that the cable preparation is correct and that the connector is fully seated before crimping.
Water ingress after outdoor installation
Re-crimp the connector, ensuring the weatherproof seal is properly formed. Check the cable jacket for any damage that might compromise the seal.
Pros and Cons
Pros
- Provides a secure and professional F-type connection.
- Outdoor-rated construction ensures durability in various environments.
- Designed for thick coaxial cables (7-8mm outer diameter).
- Two-piece design allows for robust assembly.
- Bulk pack is cost-effective for multiple installations.
Cons
- Requires a specific 9.5mm jaw hex crimp tool for installation.
- Not suitable for thinner coaxial cable types.
- Installation requires careful cable preparation.
Setup, Compatibility & Care
Compatibility: These connectors are designed for coaxial cables with an outer diameter between 7mm and 8mm, such as CT125 and WF125. They are not compatible with thinner cables like RG59.
Installation Steps:
- Prepare the Cable: Strip the outer jacket of the coaxial cable to expose the dielectric. Ensure the braid is folded back over the jacket and the center conductor is of the correct length (typically about 1/4 inch or 6mm).
- Attach the Pin: Slide the central pin onto the center conductor and crimp it securely using the appropriate crimp tool.
- Insert Connector: Slide the main connector body over the prepared cable, ensuring the center pin engages correctly with the connector body.
- Crimp the Connector: Use a hex crimp tool with a 9.5mm jaw size to crimp the connector body onto the cable. This action secures the connector and creates the weatherproof seal.
Care: These connectors are designed for permanent installation. Once properly crimped, they require no ongoing care. Ensure the cable and connector are protected from physical damage where possible.