Dulux Trade Walls and Ceilings Vinyl Matt Paint 5L - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professional decorators seeking a high-quality, easy-to-use paint for interior walls and ceilings. The Dulux Trade Welsh Flint Walls and Ceilings Vinyl Matt Paint 5L offers a professional-looking finish with excellent coverage, often requiring fewer coats. A key caveat is that this product is mixed to order and cannot be returned or refunded.
All features
| Colour | Grey |
|---|---|
| Model Part Number | DXVM1605000 |
| Brand | Paint Stop |
Extended Product Information
FAQs
What is the best way to apply this paint?
Stir the paint thoroughly and apply evenly using a brush or roller. For best results on walls and ceilings, two coats are generally recommended. Ensure good ventilation during application and drying.
How long does the paint take to dry?
The paint typically takes 2-4 hours to dry between coats. Ensure adequate ventilation for optimal drying.
Can this paint be used in a bathroom?
While it can be used on walls and ceilings, this vinyl matt paint is best suited for general interior living spaces. For high-moisture areas like bathrooms, a specialized bathroom paint with added mould resistance is generally recommended.
What surfaces is this paint suitable for?
This paint is suitable for interior walls and ceilings, including plaster, previously painted surfaces, and wallpapered surfaces, provided they are properly prepared.
Why can't I return this product?
This specific paint is mixed to order in the 'Welsh Flint' grey colour. Due to its custom mixing, it cannot be returned or refunded unless faulty.
How do I clean up after using this paint?
Clean brushes, rollers, and equipment immediately after use with water. Wipe down painted surfaces with a damp cloth and mild detergent for routine cleaning.
What does 'Low VOC' mean?
'Low VOC' stands for Low Volatile Organic Compounds. Paints with low VOCs release fewer chemicals into the air, contributing to better indoor air quality.
Troubleshooting
Uneven finish or brush marks visible
Ensure paint is well-stirred and applied evenly. Avoid over-working the paint. Ensure adequate lighting when painting to spot inconsistencies. Consider using a high-quality roller for smoother coverage on walls.
Paint is not covering well
Ensure the surface is properly prepared and primed if necessary. Apply a second coat if the initial coverage is poor, especially over dark or vibrant colours.
Paint is drying too quickly, causing lap marks
Work in smaller sections, maintaining a wet edge. Ensure good ventilation but avoid direct heat or strong drafts that can accelerate drying.
Surface feels tacky after drying time
This can indicate insufficient drying time or poor ventilation. Ensure the room is well-ventilated and allow extra drying time. Check the temperature and humidity conditions.
Pros and Cons
Pros
- Achieves a professional, smooth matt finish.
- Good coverage saves time and paint.
- Quick drying time minimizes disruption.
- Easy to apply with minimal mess.
- Low VOC content for improved air quality.
- Suitable for both walls and ceilings.
Cons
- Mixed to order, therefore non-refundable.
- Matt finish may require careful application to avoid lap marks.
- Best suited for interior use only.
- Requires appropriate surface preparation for optimal results.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Fill any cracks or holes with a suitable filler and sand smooth. For best results, prime bare or porous surfaces with a suitable primer.
Application: Stir the paint thoroughly before use. Apply evenly with a brush, roller, or spray. Avoid over-application. Typically, two coats are recommended for best results, especially when changing colour significantly.
Drying Time: Allow approximately 2-4 hours for drying between coats. Ensure good ventilation during application and drying.
Compatibility: Suitable for interior walls and ceilings. Not recommended for high-moisture areas like bathrooms unless specific precautions are taken or a more specialized paint is used.
Care: Clean brushes and equipment immediately after use with water. For cleaning the painted surface, use a damp cloth and mild detergent. Avoid abrasive cleaners.