Sulcado Slat Wall Panel - French Oak - 300mm x 2600mm x 12mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Sulcado Slat Wall Panel is an ideal choice for homeowners and interior designers looking to add sophisticated texture and acoustic warmth to living rooms, bedrooms, or kitchens. Crafted from high-quality 3D PS Extruded Polymer Foam, these panels provide a realistic wood aesthetic with the durability of a waterproof material. While they offer a versatile and simple installation process, they are not intended for use in areas with direct, continuous water exposure, such as inside a shower or bath enclosure.
All features
| Model Part Number | ISCFO300 |
|---|---|
| Brand | Sulcado |
Extended Product Information
FAQs
Can these panels be used in a shower?
No. While the material is waterproof, it is not watertight. It should not be installed in areas with direct, continuous contact with flowing water.
Can I paint the panels?
The French Oak finish is designed to be the final look. Painting is not recommended as it may alter the texture and finish.
How do I clean the slat panels?
Simply use a damp cloth to wipe away dust or grime. Avoid using strong chemical solvents.
Are the panels suitable for ceilings?
Yes, these lightweight panels are suitable for ceiling applications as long as they are securely fastened according to the manufacturer's mounting guidelines.
Can I hide electrical wires behind these?
Yes, by installing the panels on top of a batten framework, you create a gap that can accommodate wiring and cabling.
Troubleshooting
Panel seams are visible
Ensure the panels are pressed firmly together during installation to engage the hidden joint system correctly.
Panel is warping on the wall
Verify that the wall surface is level; if the wall is bowed, use battens to create a flat mounting plane.
Edge chips while cutting
Use a sharp, fine-toothed handsaw or a jigsaw with a fine-finish blade to prevent tearing the polymer surface.
Pros and Cons
Pros
- Realistic French Oak aesthetic
- Lightweight and easy to handle
- Waterproof material surface
- Versatile mounting options
- Effective at hiding wall imperfections
Cons
- Not suitable for direct water spray zones
- Requires careful planning for pattern alignment
- Cutting polymer foam requires fine-toothed blades to avoid chipping
Setup, Compatibility & Care
Installation is straightforward and can be achieved using construction adhesive or screws depending on your wall substrate. If mounting to masonry, use appropriate wall anchors.
- Preparation: Ensure the wall surface is clean, dry, and flat.
- Measurement: Measure the area and cut panels to height using a fine-toothed saw.
- Mounting: Apply adhesive in a zig-zag pattern or screw directly into the wall. For a batten system, secure vertical timber battens first, then fix the panels to the battens.
- Care: To maintain the appearance, wipe down occasionally with a soft, damp cloth. Avoid harsh chemicals or abrasive scrubbing pads which may damage the finish. Because they are not watertight, ensure that you do not place these in positions where they will receive constant, direct water flow.