Shopping.co.uk

Mercusys AV1000 Gigabit Powerline WiFi Kit - MP510 KIT

Not AvailableMercusys AV1000 Gigabit Powerline WiFi Kit - MP510 KIT
Not Available
Not Available

The Mercusys MP510 KIT AV1000 Wireless N300 Gigabit Powerline Starter Kit is a twin pack designed ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

TP-Link PowerLine Network Adapter Kit - TL-WPA4220 KIT V4From £40View product TP-Link Powerline Extender - AV1000 Gigabit, AC1200 Wi-Fi - TL-WPA7617 (UK)From £60View product Powerline Adapter Kit - TP-Link TL-PA7017P KIT (UK)From £50View product TP-Link G.hn2400 Powerline AX1800 Wi-Fi 6 Kit - PGW2440 KIT (UK)From £130View product

Product Information

Full details

The Mercusys MP510 KIT is designed for users who want to extend their network coverage without running Ethernet cables. This kit provides a simple and reliable solution for eliminating Wi-Fi dead zones, offering both wired and wireless connections throughout your home. A potential limitation is that performance depends on the quality of your home's electrical wiring. It features HomePlug AV2 technology for fast data transfer, up to 300 Mbps wireless speeds, and Gigabit Ethernet ports for stable connections.

All features

Model Part NumberMP510 KIT
BrandMERCUSYS

Extended Product Information

FAQs

How do I reset the MP510 KIT?

Locate the reset button on each adapter. Use a pin or paperclip to press and hold the reset button for about 10 seconds until the lights on the device reset. The devices will then return to factory settings.

Can I use the MP510 KIT with other Powerline adapters?

Yes, the MP510 KIT is compatible with other HomePlug AV/AV2 standard adapters. You can add more adapters to extend your network further.

What is the range of the MP510 KIT?

The kit has a range of up to 300 meters on the same electrical circuit. However, actual range may vary depending on the condition of your home's electrical wiring.

Does the MP510 KIT support Wi-Fi security?

Yes, the MP510 KIT supports WEP, WPA-PSK, WPA2-PSK, and WPA3-PSK security protocols to protect your wireless network.

Can I use the MP510 KIT with a smart plug?

No, it is not recommended to plug the adapters into smart plugs or surge protectors, as this may impact performance.

What is the warranty period for the MP510 KIT?

The Mercusys MP510 KIT is typically covered by a standard manufacturer's warranty. Please refer to your product documentation or contact customer support for specific warranty details.

How do I update the firmware on the MP510 KIT?

Firmware updates can be performed via the Mercusys management interface. Please check the Mercusys website for the latest firmware and update instructions.

Troubleshooting

Powerline adapter not connecting

Ensure both adapters are plugged into power outlets. Check the Powerline LED on each adapter. If the LED is not lit, try plugging them into different outlets or reset the adapters by pressing the reset button.

Slow internet speeds

Check the electrical wiring in your home. Ensure no other devices are causing interference. Try moving the adapters closer together or to different outlets. Ensure that the devices are not plugged into surge protectors or extension cords.

Wi-Fi not working

Ensure that the Wi-Fi is enabled on the MP510 extender. Check your router's SSID and password, and ensure these are correctly configured on the MP510. Reset the MP510 and reconnect.

Cannot connect a device via Ethernet

Check the Ethernet cable connection to the device and the MP510 extender. Make sure the Ethernet port on the MP510 is functioning correctly. Try a different Ethernet cable.

Pros and Cons

Pros

  • Easy setup: Plug and play functionality, no complex configuration needed.
  • Extended coverage: Extends your network coverage to areas with poor or no Wi-Fi signal.
  • High-speed data transfer: HomePlug AV2 technology supports speeds up to 1000 Mbps.
  • Wired and wireless options: Provides both wired and wireless connections for versatility.
  • Secure network: Uses AES encryption for secure data transmission.

Cons

  • Performance dependent on electrical wiring: Performance can be affected by the quality of your home's electrical wiring.
  • Potential for interference: May experience interference from other devices on the same electrical circuit.
  • Limited to the same electrical circuit: Only works within the same electrical circuit in your home.
  • Wireless speed limitations: Wireless speeds are capped at 300 Mbps, which may be slower than some modern Wi-Fi standards.
  • Additional adapters needed for larger homes: You may need to purchase additional adapters to cover larger homes.

Setup, Compatibility & Care

Setup

  1. Plug the MP500 adapter into a power outlet near your router.
  2. Connect the MP500 to your router using the included Ethernet cable.
  3. Plug the MP510 extender into a power outlet in the area where you need network coverage.
  4. The devices will automatically pair. If the Powerline LED on the MP510 is lit, the connection is successful.
  5. To clone your Wi-Fi network, press the WPS button on your router, then the Wi-Fi Clone button on the MP510.

Compatibility

The MP510 KIT is compatible with:

  • All standard routers
  • HomePlug AV/AV2 adapters
  • Operating systems: Windows 10, Windows 7, Windows 8, Windows 8.1, Mac OS, and Linux

Care

  • Keep the devices in a well-ventilated area.
  • Avoid placing the devices near heat sources or in direct sunlight.
  • Clean the devices with a dry cloth. Do not use liquid cleaners.