Unibond Super PVA - 5 Litre
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Unibond Super PVA as a primer, bonding agent, or adhesive. It's ideal for those working with plaster or porous surfaces, providing strong bonding capabilities. The key benefit is its versatility and effectiveness in binding common building materials. A key consideration is that it is suitable for dry service conditions only.
All features
| Model Part Number | Uni1448672 |
|---|---|
| Brand | Unibond |
Extended Product Information
FAQs
What is the shelf life of Unibond Super PVA?
The shelf life is typically 12 months from the date of manufacture when stored properly.
Can I use Unibond Super PVA on exterior surfaces?
No, it is suitable for use in dry service conditions only.
How do I clean up spills?
Wipe up spills immediately with a damp cloth while the product is wet. Dried product may be difficult to remove.
Can I apply multiple coats?
Yes, but allow each coat to dry completely before applying the next.
What is the recommended dilution ratio for priming?
A dilution ratio of 5:1 is typically recommended for priming.
Is Unibond Super PVA suitable for use with wallpaper?
No, it is not recommended for use with wallpaper. Refer to wallpaper adhesive products.
Troubleshooting
Poor adhesion
Ensure surfaces were properly prepared and cleaned before application. Check the dilution ratio.
Slow drying time
Ensure adequate ventilation. Check the surrounding temperature and humidity levels.
Product appears lumpy
Ensure product is thoroughly mixed before use.
Pros and Cons
Pros
- Excellent bonding strength.
- Versatile applications including priming and adhesive use.
- BBA accreditation provides assurance of quality.
- Easy to apply.
Cons
- Suitable only for dry service conditions.
- Requires at least one porous surface for effective bonding.
- Limited to specific building materials.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure surfaces are clean, dry, and free from loose particles.
- Dilution: Dilute as required, typically 5:1 for priming. Refer to the product label for specific ratios.
- Application: Apply using a brush or roller, ensuring even coverage.
- Drying Time: Allow to dry completely before applying subsequent materials. Drying times vary depending on conditions.
Compatibility
- Compatible with a wide range of building materials including plaster, brick, concrete, and timber.
- Suitable for use with various paints and coatings.
Care
- Store in a cool, dry place.
- Keep container tightly sealed when not in use.
- Clean tools with water immediately after use.