Shopping.co.uk

Bond it A43 Threadlock - Blue

Not AvailableBond it A43 Threadlock - Blue
Not Available

A43 THREADLOCK- Oil Tolerant Threadlocking Adhesive. A medium viscosity, medium strength, screw an...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone needing a reliable threadlocking adhesive, especially those working with machinery, automotive parts, or DIY projects. The Bond it A43 Threadlock provides a medium-strength, oil-tolerant bond, preventing loosening from vibration and ensuring a secure hold. Keep in mind that while it's oil-tolerant, optimal results are achieved on clean surfaces.

All features

ColourBlue
Model Part NumberA43
BrandBond it

Extended Product Information

FAQs

What is the shelf life of Bond it A43?

Check the product packaging for the expiration date.

Can Bond it A43 be used on plastic?

Bond it A43 is primarily designed for use on metal fasteners. Its suitability for use on plastic should be verified with the manufacturer.

How do I remove Bond it A43 if I need to disassemble the parts?

For medium-strength threadlockers like Bond it A43, you may be able to disassemble the parts with standard hand tools. Heat can often help soften the adhesive, making disassembly easier. If necessary, use a suitable solvent to aid in removal.

Can I use Bond it A43 on heavily oiled parts?

While Bond it A43 is oil-tolerant, it's best to remove as much oil and grease as possible for optimal performance.

What temperature range can Bond it A43 withstand?

Refer to the product datasheet for specific temperature resistance information.

How long does Bond it A43 take to cure?

Curing time varies depending on the temperature, but it generally cures within a few hours. Full strength is usually achieved within 24 hours.

Troubleshooting

Fasteners are still loosening.

Ensure the correct amount of threadlocker was applied and that the parts were properly prepared. Check the torque specifications and ensure the fastener was tightened to the correct value.

The adhesive is not curing.

Ensure that the fastener is in contact with the metal and that there is no air present. Make sure the product is within its expiration date.

Pros and Cons

Pros

  • Oil-tolerant formula reduces the need for extensive surface preparation.
  • Medium strength allows for disassembly when necessary.
  • Prevents loosening due to vibration, ensuring secure fastening.
  • Seals out moisture, preventing rust and corrosion.
  • Non-drip consistency for clean application.

Cons

  • Optimal performance is achieved on clean surfaces, requiring some preparation.
  • Medium strength might not be suitable for applications requiring extremely high holding power.
  • Requires the absence of air to cure.

Setup, Compatibility & Care

Setup

  1. Preparation: Remove heavy oil and grease contamination. While the product is oil-tolerant, cleaning the parts beforehand will improve performance.
  2. Application: Apply Bond it A43 to the threads of the fastener, ensuring full coverage.
  3. Assembly: Assemble the parts and tighten to the manufacturer's recommended torque.
  4. Curing: Allow the adhesive to cure in the absence of air for a strong bond.

Compatibility

  • Materials: Suitable for use on a wide range of metals.
  • Thread Types: Works with fine to medium pitch threads.

Care

  • Storage: Store in a cool, dry place away from direct sunlight.
  • Cleanup: Use appropriate solvents to clean up any spills or residue before the product cures.