External Corner Trim - 2440mm Black Tile
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for individuals enhancing bathroom or wet room finishes with Wetwall Tile Collection Panels. The external corner trim in black tile colour provides a clean, seamless edge, protecting panel edges and adding a sleek, modern look for a professional finish. A potential limitation is that it is specifically designed for Wetwall panels and may not be compatible with other systems.
All features
| Brand | Wetwall |
|---|
Extended Product Information
FAQs
What is the primary purpose of the external corner trim?
The external corner trim is designed to provide a clean, professional finish and protection to the exposed edges of Wetwall panels at external corners, preventing damage and water ingress.
Can I use this trim with other brands of wall panels?
This trim is specifically manufactured for Wetwall Tile Collection Panels and is not guaranteed to be compatible with panels from other brands or systems.
How do I cut the trim to size?
You should use a fine-tooth saw to cut the trim to the required length, ensuring a clean and precise cut for a seamless fit.
What type of adhesive should I use?
Use an adhesive that is specifically recommended for wall panels and trims, and suitable for use in high-moisture environments. Always follow the adhesive manufacturer's instructions.
How long is the trim?
The trim is 2440mm in length.
How should I clean the trim?
Clean the trim with a soft, damp cloth. Avoid abrasive cleaners or solvents. A mild detergent can be used for tougher marks.
What colour is the trim?
The trim is in a black tile colour, designed to complement the Wetwall Tile Collection Panels.
Troubleshooting
Trim does not fit snugly against the panel.
Ensure the wall panels are installed perfectly flush and square. Check that the trim has been cut at the correct angle and that there is no debris preventing a flush fit. Reapply adhesive if necessary.
Adhesive is visible after installation.
Wipe away excess adhesive immediately after fitting the trim with a damp cloth. If adhesive has dried, carefully try to remove it with a plastic scraper or a cleaner recommended for the adhesive type, being cautious not to damage the trim surface.
Trim appears to be separating from the wall.
This may indicate insufficient adhesive or improper bonding. Carefully remove the trim, clean both surfaces, and reapply a fresh coat of appropriate adhesive, ensuring firm pressure is applied during and after installation according to the adhesive manufacturer's instructions.
Pros and Cons
Pros
- Provides a clean and professional finish to corners.
- Offers protection to the edges of wall panels.
- Designed to match Wetwall Tile Collection Panels for a cohesive look.
- Enhances the modern aesthetic of wet areas.
- Durable construction suitable for high-moisture environments.
Cons
- Only compatible with Wetwall Tile Collection Panels.
- Requires precise cutting for a perfect fit.
- The black tile colour may not suit all design schemes.
Setup, Compatibility & Care
Setup: This trim is designed to be installed onto the external corners of Wetwall Tile Collection Panels. Ensure the panels are securely fitted before applying the trim. Measure the required length and cut the trim precisely using a fine-tooth saw for a clean edge. Apply a suitable adhesive recommended for wall panels and trims to the back of the trim, then press firmly into place along the external corner. Wipe away any excess adhesive immediately.
Compatibility: This trim is specifically designed for use with Wetwall Tile Collection Panels. It is not guaranteed to be compatible with wall panels from other brands or systems.
Care: To maintain the appearance and longevity of the trim, clean it regularly with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the surface. For stubborn marks, a mild detergent can be used, followed by rinsing with clean water and drying thoroughly.