CV Joint Boot - febi bilstein - 173324
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The febi bilstein CV joint boot kit (173324) is designed for automotive technicians and DIY enthusiasts who need a reliable, high-quality replacement for damaged drive shaft bellows on the transmission-side front axle. This kit provides a precision-engineered solution that restores protection to critical CV joints, helping to prevent lubricant leakage and debris contamination. While it is an essential component for drive axle longevity, users should be aware that proper installation requires specialized tools, such as a CV boot clamp pliers, to ensure a factory-standard seal.
All features
| Model Part Number | 173324 |
|---|---|
| Brand | febi bilstein |
Extended Product Information
FAQs
Does this kit include the metal clamps?
Yes, the kit is designed as a complete replacement solution and includes the necessary clamps and grease.
How do I know if this fits my car?
You should check the febi bilstein online catalog or use a parts compatibility checker by entering your vehicle's year, make, model, and engine type.
Can I use standard axle grease instead of the included packet?
No, it is highly recommended to use the provided molybdenum grease as it is specifically designed for the high-pressure environment of the CV joint.
Do I need to remove the whole axle to install this?
Yes, typically the drive shaft must be removed from the transmission to properly clean the old grease and install the new boot.
How often should I inspect the CV boots?
It is best practice to inspect your CV boots for cracks, tears, or grease spray every time you have the vehicle raised for a tire rotation or oil change.
Troubleshooting
Grease is leaking after installation
Check that the clamps were tightened to the correct torque using a proper CV boot clamping tool.
Boot is rubbing against suspension components
Ensure the boot is correctly seated in the grooves of the shaft and that the shaft length is not over-extended.
Pros and Cons
Pros
- Matches original equipment specifications for reliable fit
- Comprehensive kit includes all necessary lubrication
- High-quality material resists premature tearing or cracking
- Effective at extending the service life of the front axle CV joints
Cons
- Requires specialized tools for proper tensioning of clamps
- Installation requires removing the drive shaft which is labor-intensive
- Not compatible with all vehicle makes; must verify fitment by VIN
Setup, Compatibility & Care
Before starting, consult your vehicle's service manual to confirm compatibility using the `173324` part number against your specific VIN. Installation typically requires removing the front drive shaft from the transmission output.
- Secure the vehicle on jack stands.
- Remove the wheel and the necessary suspension components to release the axle.
- Remove the old, damaged boot and thoroughly clean the joint of all old, contaminated grease.
- Apply the included molybdenum grease evenly inside the new boot and over the joint bearings.
- Slide the new boot over the shaft, ensuring the seating ridges are correctly aligned.
- Secure the metal clamps using a CV boot clamp tool to ensure a leak-proof seal.
Regularly inspect the boot during every oil change for signs of cracking or grease weeping.