Titebond III Ultimate Wood Glue - 473ml / 16oz Bottle
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for woodworkers, DIY enthusiasts, and anyone needing a strong, waterproof wood glue. Titebond III Ultimate Wood Glue provides superior bond strength for both interior and exterior projects, offering a longer open assembly time. However, it's important to note that while it's waterproof, it's not designed for continuous submersion.
All features
| Model Part Number | 1414 |
|---|---|
| Brand | Titebond |
Extended Product Information
FAQs
What is the open assembly time for Titebond III?
The open assembly time is approximately 10 minutes.
Can Titebond III be used outdoors?
Yes, Titebond III is waterproof and ideal for exterior applications.
Is Titebond III safe for food contact?
Yes, it is FDA approved for indirect food contact.
How long does it take for Titebond III to fully cure?
Full cure time is typically 24 hours.
What is the best way to clean up Titebond III?
Use a damp cloth while the glue is still wet. Dried glue can be sanded.
Does Titebond III sand easily?
Yes, it sands easily without softening once fully cured.
What is the shelf life of Titebond III?
The shelf life is typically 2 years when stored properly.
What temperature range can I apply Titebond III?
It can be applied at temperatures as low as 45°F (7°C).
Troubleshooting
Glue is not bonding properly.
Ensure surfaces are clean, apply enough glue, and clamp the pieces securely for the recommended time.
Glue is drying too quickly.
Work within the open assembly time and ensure appropriate temperature conditions.
Glue is not cleaning up easily.
Clean up spills immediately with a damp cloth before the glue dries.
Pros and Cons
Pros
- Waterproof for exterior use.
- Strong bond strength.
- Extended open assembly time.
- Easy cleanup with water.
- Non-toxic and solvent-free.
- Mildew resistant.
Cons
- Not designed for continuous submersion.
- May require clamping for optimal bond.
- Bond strength may vary depending on wood type.
- May not be suitable for all types of projects.
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean, dry, and properly prepared.
- Application: Apply a bead of Titebond III to one surface and spread evenly.
- Assembly: Join the pieces within the open assembly time.
- Clamping: Clamp the pieces together for the recommended time (check product specifications).
- Cleanup: Remove any excess glue with a damp cloth.
Compatibility: Titebond III works effectively on various wood types.
Care: Store in a cool, dry place. Avoid freezing. Clean up spills immediately while the glue is wet.