Hydraulic Pipe Bender - KATSU - 12 Ton - 1/2" - 2"
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users of the KATSU 12 Ton Hydraulic Pipe Bender effectively bend pipes ranging from 1/2" to 2" in diameter. Ideal for professionals and DIY enthusiasts working with gas, water, sprinkler, or exhaust pipes, the bender provides precise and powerful bends up to 90 degrees. Note that it's not suitable for square pipes.
All features
| Model Part Number | Does Not Apply |
|---|---|
| Brand | KATSU |
Extended Product Information
FAQs
What pipe sizes can this bender handle?
The KATSU pipe bender can handle pipe diameters from 1/2" to 2".
What types of pipes can I bend with this tool?
You can use this bender for gas, water, sprinkler, and exhaust pipes.
What is the maximum bending angle?
The maximum bending angle is 90 degrees.
Is this bender suitable for square pipes?
No, this bender is not suitable for square pipes.
What is the rated load?
The rated load is 12T.
What wall thickness of pipe is suitable for the bender?
The suitable wall thickness for bending is 2.75-4.5mm.
How do I maintain the bender?
Wipe down the bender after each use, store it in a dry location, and inspect the hydraulic system regularly. Lubricate moving parts occasionally.
What dies are included?
The dies included are 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2".
Troubleshooting
Pipe doesn't bend
Ensure the correct die is used for the pipe size and that the pipe is properly seated. Check the hydraulic fluid level and top it up if needed.
Bender leaks fluid
Check for loose fittings or damaged seals. Tighten the fittings or replace the seals as necessary.
Bends are not accurate
Ensure the pipe is correctly positioned in the die and that the bending process is controlled. Check the bending angle using a protractor.
Difficulty in operation
Ensure that the hydraulic pump is properly primed. Make sure all connections are secure.
Pros and Cons
Pros
- High bending capacity enables handling of a wide range of pipe sizes.
- Included dies eliminate the need for extra purchases to bend various pipe diameters.
- Heavy-duty construction ensures the tool's longevity and reliability.
- Capable of achieving precise bends up to 90 degrees.
- Suitable for use with common pipe types (gas, water, sprinkler, exhaust).
Cons
- Not suitable for bending square pipes, limiting its application.
- Requires manual operation, which may be time-consuming for large projects.
- Limited to a specific range of pipe wall thicknesses (2.75-4.5mm).
- Heavier than manual benders, making it less portable.
- Requires some initial setup and familiarity with hydraulic tools.
Setup, Compatibility & Care
- Setup: Unpack the pipe bender and identify the different dies. Select the correct die for your pipe diameter.
- Compatibility: This bender is compatible with pipes from 1/2" to 2" in diameter, with wall thicknesses of 2.75-4.5mm. It is not suitable for square pipes.
- Care: After each use, wipe down the bender with a clean cloth to remove any debris or grease. Store the bender in a dry location. Regularly inspect the hydraulic system for leaks or damage. Ensure the dies are clean and free of rust. Lubricate the moving parts occasionally.