Soluguard Woodworm & Rot Sprayer Kit - 2 X 5 Litres
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you understand and effectively use the Soluguard Woodworm & Rot Sprayer Kit (2 x 5 Litres). Designed for both amateur and professional use, this kit protects wooden structures from woodworm and wood-rotting fungi. The main caveat is that serious infestations and dry rot require professional treatment. This guide covers setup, best practices, and troubleshooting to help you get the most out of your Soluguard kit.
All features
| Model Part Number | AM-SOLDUAL SPR 2 |
|---|---|
| Brand | Soluguard |
Extended Product Information
FAQs
How do I apply the Soluguard Woodworm & Rot Treatment?
You can apply it by brush or spray. For spray application, use the Festa 7 pump-up sprayer included in the kit. For smaller items, dipping the wood is also an option.
Can I use this product on painted wood?
No, this product is intended for application to unpainted, unvarnished timber. You must remove any existing paint or varnish before application.
What safety precautions should I take?
Always wear appropriate personal protective equipment (PPE), including gloves, eye protection, and a mask. Work in a well-ventilated area and avoid inhaling the spray.
How long does it take for the treatment to dry?
Drying times vary depending on environmental conditions. Allow the treated wood to dry completely before handling or applying any further treatments.
Can I use this product on exterior wood?
Yes, it can be used on exterior wood, but it should not be used on wood in ground contact.
What if I have a serious woodworm infestation?
Serious woodworm infestations or any timber decay caused by dry rot should be dealt with by a professional timber treatment company. Contact a specialist.
How much area does one 5-liter container cover?
Coverage depends on the wood type and the application method. Consult the product label for specific coverage details.
Where can I find suitable timber treatment companies?
If you need a professional, fill out the contractor enquiry form provided to find suitable companies in your area.
Troubleshooting
Sprayer is not working properly.
Check if the sprayer is properly primed. Make sure the nozzle is not clogged and the tank is correctly pressurized. Refer to the sprayer's manual for specific instructions.
Treatment is not penetrating the wood.
Ensure the wood surface is clean and free from any coatings (paint, varnish). Reapply the treatment and allow it to penetrate the wood. Check for any obstructions to the wood's surface.
Odor is strong after application.
Ensure adequate ventilation during and after application. The product has low odor but proper ventilation will reduce it further. Wait for the treatment to completely dry.
Pros and Cons
Pros
- Effective against woodworm and wood-rotting fungi.
- Easy to apply with brush or spray.
- Suitable for a wide range of wooden surfaces.
- Low-odor and solvent-free formula.
- Approved for both amateur and professional use.
Cons
- Not suitable for wood in ground contact.
- Serious infestations require professional treatment.
- Requires proper surface preparation for best results.
- Treatment may require multiple applications depending on the severity of the issue.
Setup, Compatibility & Care
- Preparation: Clean the timber surface thoroughly to remove dust, dirt, and loose paint or varnish. This step is crucial for the treatment to effectively penetrate the wood.
- Application: Apply the treatment evenly using a brush or a suitable sprayer. For spray application, ensure the entire surface is covered.
- Dipping Method: For smaller items, dipping the wood in the treatment for at least 3 minutes is another effective method.
- Drying Time: Allow the treated wood to dry completely. Drying times may vary depending on environmental conditions (temperature, humidity).
- Compatibility: The treatment is intended for use on unpainted, unvarnished timber. Check compatibility with any existing finishes before application.
- Care: Store the product in a cool, dry place, away from direct sunlight. Always read and follow the safety instructions on the label. Dispose of the container responsibly according to local regulations.