CeramicSpeed UFO Ultra Endurance Wax - Black - 400g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
CeramicSpeed UFO Ultra Endurance Wax is the ideal choice for endurance cyclists and long-distance riders who prioritize drivetrain efficiency and silent operation. This premium hot melt lubricant offers exceptional longevity, providing between 500km and 1000km of clean, quiet performance depending on environmental conditions, though it does require the time-intensive process of hot-waxing rather than simple drip application.
All features
| Colour | Black |
|---|---|
| Model Part Number | 115376 |
| Brand | CeramicSpeed |
Extended Product Information
FAQs
Can I use this wax with any chain?
Yes, it is compatible with all standard bicycle chains, but it performs best when applied to a clean, stripped chain.
How often do I need to re-wax?
Depending on conditions, you can ride between 500km and 1000km before needing to re-apply the wax.
Is the wax toxic?
No, the CeramicSpeed UFO Ultra Endurance Wax is non-toxic and bio-degradable.
Can I melt this in a microwave?
No, please only use a dedicated wax heater or a water bath to heat the wax safely.
Will this work in wet weather?
Yes, it provides 500-750km of longevity in mixed or wet conditions, significantly outperforming traditional wax coatings.
Do I need to clean the chain every time I re-wax?
A quick wipe or rinse is usually enough if the chain is clean, but a full deep clean is recommended if the chain has been exposed to extreme mud or debris.
Troubleshooting
Chain feels stiff immediately after waxing
The wax may have solidified too heavily within the links. Flex the chain manually or shift through your gears on a stand to break the stiff wax coating.
Wax is not lasting the expected 500km
This is often caused by an improperly cleaned chain during the initial application. Ensure all old grease is removed before the first wax bath.
Pros and Cons
Pros
- Extremely long intervals between re-application
- Extremely quiet and clean drivetrain operation
- Environmentally friendly, non-toxic formula
- Highly efficient for long-distance endurance cycling
Cons
- Requires removing the chain for hot-wax application
- Setup process is more involved than liquid lubes
- Requires specific equipment like a wax heater or water bath
Setup, Compatibility & Care
To prepare your chain, perform a deep clean using a degreaser to remove all existing oils; the chain must be completely dry before immersion.
- Heating: Place the wax pellets in a dedicated wax heater or float the sealed packaging in a hot water bath until fully melted.
- Application: Submerge your clean, dry chain into the liquid wax. Agitate the chain to ensure the wax penetrates every link and roller.
- Curing: Remove the chain and hang it to dry. The wax will solidify as it cools.
- Finishing: Once cool, flex the chain links to break the wax seal so the chain remains supple before installing it on your bike.
Keep the wax stored in a cool, dry place to prevent contamination from dust or grit.