Moto Master 520 V4 Chain Gold - 120L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Moto Master 520 V4 Chain Gold - 120L is designed for motocross and enduro riders seeking enhanced durability and extended lifespan for their motorcycle chains. Its key benefit is the high-quality O-ring seal, which significantly increases longevity compared to non-sealed chains. A potential consideration is its 120-link length, which may require adjustment for specific motorcycle models. This chain features a gold finish and is manufactured in Japan, emphasizing its quality construction.
All features
| Model Part Number | 652002 |
|---|---|
| Brand | Moto Master |
Extended Product Information
FAQs
What is the main advantage of the O-ring seal on this chain?
The O-ring seal traps lubricant inside the chain and prevents dirt and moisture from entering, significantly extending the chain's lifespan and reducing maintenance frequency compared to non-sealed chains.
Is this chain suitable for street use?
This chain is specifically designed and recommended for motocross and enduro (off-road) use. While it might function on a street bike, its design and lubrication system are optimized for off-road conditions.
How often should I lubricate this chain?
Lubrication frequency depends on riding conditions. For typical off-road use, inspect and lubricate after every few rides or after riding through mud or water. Consult your motorcycle's manual for specific recommendations.
Do I need special tools to install this chain?
Yes, a specialized chain breaker tool is required to cut the chain to the correct length. It is also highly recommended to use a chain riveting tool to properly install the connecting link.
What does '520' refer to in the product name?
'520' refers to the chain pitch, which is the distance between the inner and outer plates. It's crucial that your motorcycle's sprockets also have a 520 pitch for compatibility.
What is the benefit of the gold finish?
The gold finish is primarily aesthetic, providing a premium look. It also offers some additional corrosion resistance compared to standard finishes.
Where is this chain manufactured?
This Moto Master chain is manufactured in Japan, known for its high standards in precision engineering and quality.
Troubleshooting
Chain is too long or too short
Use a specialized chain breaker tool to remove or add links. Consult your motorcycle's service manual for the correct length and procedure. Professional installation is recommended if unsure.
Stiff links or poor movement
Ensure the chain is properly lubricated. If the stiffness persists after lubrication, check for contaminants trapped by the O-rings or potential damage to the links. Clean thoroughly and re-lubricate.
Premature wear or stretching
Verify that the chain pitch matches the sprockets (520 pitch). Ensure sprockets are in good condition. Check for proper chain tension and that the chain is not running dry. Riding conditions (e.g., excessive dirt, mud) can also accelerate wear.
Noise from the chain
A properly lubricated and tensioned chain should operate relatively quietly. Excessive noise may indicate a lack of lubrication, incorrect tension, or worn sprockets. Clean and lubricate the chain, and check sprocket condition.
Pros and Cons
Pros
- Significantly longer lifespan than non-sealed chains
- O-ring seal protects against dirt and extends lubrication intervals
- High-quality construction suitable for demanding off-road use
- Corrosion-resistant gold finish
- Made in Japan for assured quality
Cons
- 120-link length may require cutting for specific motorcycle models
- Requires proper installation and maintenance for optimal performance
- Higher initial cost compared to basic chains
Setup, Compatibility & Care
Setup: Before installation, ensure the chain length is appropriate for your specific motorcycle. The 120-link chain typically needs to be cut to the exact size required for your swingarm and gearing setup. This process should be performed using a proper chain breaker tool to avoid damaging the links. Consult your motorcycle's service manual for the correct procedure and recommended chain slack.
Compatibility: The 520 V4 chain uses a 520 pitch, which is a common size for many motocross and enduro motorcycles. Always verify that your sprockets are also 520 pitch to ensure proper fitment and performance. It is designed for off-road applications.
Care: To maximize the lifespan of your Moto Master 520 V4 chain, regular cleaning and lubrication are essential. After riding in wet or muddy conditions, clean the chain thoroughly with a degreaser and a chain brush. Apply a quality motorcycle chain lubricant suitable for off-road use, ensuring it penetrates the O-rings. Periodically check the chain for proper tension and wear. Inspect the O-rings for any signs of damage or drying out.