Clarke AP16GF Gravity Fed Spray Gun - 1.4mm Nozzle
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Clarke AP16GF is a professional-grade gravity fed spray gun engineered for automotive refinishing, detailed woodwork, and general surface coating applications. Built for precision, this tool utilizes HVLP technology to provide a high transfer efficiency, significantly reducing material waste compared to traditional spray systems. While it offers exceptional control and finish quality, it requires a robust air supply, specifically a minimum 3hp air compressor, to maintain the necessary pressure for consistent performance.
All features
| Model Part Number | AP16GF |
|---|---|
| Brand | Clarke |
Extended Product Information
FAQs
Can I use this gun with a small 1.5hp compressor?
No, this unit requires a minimum 3hp compressor to maintain the necessary airflow for HVLP technology to function effectively.
What does the 1.4mm nozzle size mean?
The nozzle size refers to the diameter of the fluid tip, which dictates how much material passes through. 1.4mm is a standard size for clear coats, base coats, and general-purpose primers.
Is the nylon cup dishwasher safe?
No, you should clean the nylon cup manually using the appropriate solvent recommended by the paint manufacturer.
How do I adjust the spray pattern?
Use the side-mounted air cap control knob to transition from a round spot pattern to a wider fan pattern.
Does this gun come with an air hose?
No, the package includes the spray gun and cup only; you will need to provide your own 1/4 inch compatible air hose.
Troubleshooting
Spluttering or interrupted spray pattern
Check if the paint viscosity is too thick or if there is insufficient air pressure from the compressor.
Excessive overspray
Reduce the air pressure or adjust the fluid control knob to decrease the material flow.
Fluid leaking from the nozzle
Tighten the fluid nozzle or clean any debris lodged between the needle and the seat.
Pros and Cons
Pros
- High paint transfer efficiency reduces waste
- Independent controls offer precise application
- Lightweight nylon cup prevents excessive weight
- Versatile 1.4mm nozzle for various materials
- Sturdy professional-grade construction
Cons
- Requires a minimum 3hp air compressor
- Not suitable for smaller portable compressors
- Requires thorough cleaning between uses
- Precision nozzle sensitive to debris
Setup, Compatibility & Care
To set up the Clarke AP16GF, connect your pneumatic hose to the 1/4" air inlet, ensuring that your air compressor meets the minimum 3hp requirement to avoid pressure drops. Ensure all connections are secure to prevent air leaks, which can disrupt atomization.
Maintenance Tips:
- Immediate Cleaning: Flush the gun with appropriate thinner or solvent immediately after use to prevent paint from drying inside the nozzle or fluid passages.
- Component Inspection: Periodically check the fluid needle and nozzle for any wear or blockage.
- Lubrication: Apply a small amount of non-silicone machine oil to the needle spring and trigger pivot points occasionally to maintain smooth movement.
- Storage: Store in a dry, dust-free environment with the nozzle pointing downward or protected to prevent debris from settling in the fluid tip.