Zinsser Ceiling Pro 5 in 1 Paint - White - 2.5L
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to refresh their ceilings with a high-quality, all-in-one paint solution. Zinsser Ceiling Pro 5 in 1 offers excellent adhesion, seals stains, and bridges hairline cracks, providing a professional finish in a single coat. However, achieving the best results requires proper surface preparation. This guide will walk you through the key features, best practices, and troubleshooting tips for using Zinsser Ceiling Pro 5 in 1.
All features
| Colour | White |
|---|---|
| Model Part Number | ZN7380002C1 |
| Brand | Zinsser |
Extended Product Information
FAQs
How much area does a 2.5L tin cover?
A 2.5L tin of Zinsser Ceiling Pro 5 in 1 provides coverage of up to 25m².
Can I use this paint on walls?
Zinsser Ceiling Pro 5 in 1 is specifically designed for ceilings and is not recommended for walls.
What is the recoat time?
You can recoat Zinsser Ceiling Pro 5 in 1 in just 1 hour.
How long does it take for the paint to dry?
Touch-dry in 30 minutes and fully cured in 4 hours.
Can I use this paint in bathrooms?
Yes, it is suitable for use in bathrooms due to its resistance to fungal degradation.
How do I clean up after painting?
Clean brushes, rollers, and equipment with warm, soapy water immediately after use.
Does it have a strong odor?
No, it has a low odor due to its low VOC content.
Troubleshooting
Stains are bleeding through the paint.
Ensure thorough surface preparation. Apply a second coat, allowing for adequate drying time between coats.
Paint is not adhering properly.
Ensure the surface is clean, dry, and free of loose paint. Lightly sand glossy surfaces before painting.
Paint is cracking after drying.
Ensure a proper application thickness, avoiding heavy coats. If the cracks are severe, remove the paint and reapply.
Uneven finish or roller marks are visible.
Use a high-quality roller with the appropriate nap for ceilings. Apply the paint evenly, avoiding over-brushing or over-rolling.
Pros and Cons
Pros
- All-in-one solution simplifies the painting process.
- Excellent stain-sealing properties.
- Fast recoat time saves time.
- Low odor and VOC for a better environment.
- Bridges hairline cracks for a smoother finish.
- Provides a water-based, non-yellowing finish.
Cons
- Requires proper surface preparation for optimal results.
- Coverage may vary based on surface porosity.
- May require multiple coats on heavily stained areas.
- Not suitable for use on surfaces other than ceilings.
- Can be more expensive than some other ceiling paints.
- Full cure takes 4 hours
Setup, Compatibility & Care
- Surface Preparation: Ensure the ceiling surface is clean, dry, and free from loose paint or debris. Wash the ceiling with a suitable cleaning agent to remove dirt, grease, and mildew.
- Compatibility: Zinsser Ceiling Pro 5 in 1 is compatible with most common ceiling surfaces, including bare drywall, previously painted surfaces, and primed surfaces. Test in an inconspicuous area to confirm compatibility, especially with unknown coatings.
- Application: Stir the paint thoroughly before use. Apply with a brush, roller, or spray, ensuring even coverage. For best results, use a roller with a suitable nap for ceilings. Follow the manufacturer's instructions for application thickness.
- Drying and Recoating: Allow the first coat to dry for 30 minutes. Recoat within 1 hour. Allow 4 hours for full cure.
- Clean-up: Clean brushes, rollers, and other equipment with warm, soapy water immediately after use.