Brick Effect Wallpaper - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This SOPHIE LAURENCE white brick effect wallpaper is designed for homeowners and DIY enthusiasts looking to create a realistic, modern industrial aesthetic without the expense of masonry. The high-quality design features subtle grey tones that create a convincing 3D stone effect, making it an excellent choice for a feature wall in living rooms or bedrooms. While it provides a transformative look, users should note that the straight match pattern requires careful alignment during the installation process to ensure the design remains seamless.
All features
| Colour | White |
|---|---|
| Model Part Number | 12250 |
| Brand | SOPHIE LAURENCE |
Extended Product Information
FAQs
Is this wallpaper peel-and-stick?
No, this is a traditional paste-the-paper wallpaper.
Can this be used in a bathroom?
It is not recommended for high-humidity areas like bathrooms as steam may compromise the adhesive and the paper material.
How do I calculate how many rolls I need?
Measure the height and width of your wall. Multiply the height by the width to get the total square footage, then divide by the 5.32sqm coverage per roll, adding an extra 10% for waste and pattern matching.
Is the brick effect textured?
It features a visual 3D effect printed on the surface to mimic stone, providing a realistic look while remaining flat to the touch.
How do I remove the wallpaper later?
This product is wet removable. Apply water to the surface to soak into the paper and dissolve the adhesive, then carefully strip the wallpaper away.
Troubleshooting
Visible seams between wallpaper strips
Ensure that the wallpaper has been allowed the proper 'soaking time' before hanging, as the paper may be expanding on the wall. Use a seam roller to gently press the edges together.
Air bubbles appearing after installation
Use a smooth wallpaper brush or plastic smoother to push air bubbles toward the nearest edge. If the bubble persists, carefully prick it with a pin and press the air out.
The pattern does not align perfectly
Check that your first drop is perfectly plumb. If the wall is slightly crooked, you may need to adjust the position of the wallpaper strips slightly at the top or bottom.
Pros and Cons
Pros
- Creates a professional-looking brick aesthetic without masonry work
- High-quality printing provides a realistic 3D depth
- Easy to clean with a damp sponge
- Designed for standard paste-the-paper application
Cons
- Requires precise alignment due to the 53cm pattern repeat
- Traditional paste-the-paper method is messier than pre-pasted options
- Not suitable for high-humidity areas like bathrooms
Setup, Compatibility & Care
To install, use a standard wallpaper adhesive compatible with paper-based wallcoverings. Prepare your wall by ensuring it is clean, dry, and primed. Apply paste evenly to the back of the paper and allow it to soak for the time recommended by your adhesive manufacturer to prevent bubbling. Use a straight edge and a sharp utility knife to trim excess material at the ceiling and baseboard for a clean finish.
For ongoing care, keep the surface dry. If dusting is required, use a soft, dry cloth. If a mark occurs, use a slightly dampened sponge with very mild soap, but avoid vigorous scrubbing as this may wear down the printed texture.