Philips Lithium 3V Battery CR2032 - Silver

Philips Lithium 3V Battery CR2032 x1. Top-quality technology for small devices. Provides long-last...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Philips CR2032/01B is a single-use 3V lithium coin cell battery designed for small electronic devices, offering reliable, long-lasting power for everyday items like watches and calculators. While providing excellent longevity, its single-use nature means it requires replacement rather than recharging.

All features

ColourSilver
Model Part NumberCR2032/01B
BrandPhilips

Extended Product Information

FAQs

What devices commonly use the CR2032 battery?

CR2032 batteries are commonly used in digital watches, calculators, key fobs, small LED lights, computer motherboards, and various small electronic gadgets.

How long does a CR2032 battery typically last?

The Philips CR2032/01B offers a long shelf life of up to 10 years. Actual usage time depends on the device's power consumption, but for typical low-drain devices, it provides long-lasting performance.

Can I recharge this battery?

No, the Philips CR2032/01B is a single-use, non-rechargeable battery. It must be replaced when depleted.

What is the voltage of this battery?

This is a 3V lithium battery.

How should I dispose of used batteries?

Used batteries should be disposed of according to local environmental regulations. Many areas have designated battery recycling drop-off points.

What does 'CR2032' mean?

CR stands for 'C' for button cell and 'R' for round. 20 indicates the diameter in millimeters (20mm), and 32 indicates the thickness in tenths of a millimeter (3.2mm).

Is this battery safe to use in medical devices?

Yes, CR2032 batteries are commonly used in many small portable medical devices. However, always consult your device's manual to confirm compatibility and recommended battery type.

Troubleshooting

Device does not power on after battery replacement

Ensure the battery is inserted with the correct polarity (+/-). Check that the battery contacts in the device are clean and making proper contact. Try a fresh battery if unsure of the previous one's charge.

Device intermittently stops working

This might indicate a weak battery or poor contact. Clean the battery contacts in the device. If the issue persists, replace the battery with a new one.

Battery compartment is difficult to open

Refer to your device's manual for instructions on opening the battery compartment. Some may require a small tool or specific pressure.

Pros and Cons

Pros

  • Long-lasting performance for small devices
  • Reliable and stable 3V power output
  • Excellent 10-year shelf life
  • Wide compatibility with devices using CR2032 batteries
  • Compact and lightweight design

Cons

  • Single-use, not rechargeable
  • Requires careful handling and disposal
  • May not be suitable for high-drain devices

Setup, Compatibility & Care

Compatibility: This battery is interchangeable with other CR2032, DL2032, and similar designations, making it a versatile option. Always confirm your device's battery requirements before purchase.

Setup:

  1. Ensure the device is powered off.
  2. Open the battery compartment, often found on the back or side of the device.
  3. Note the orientation of the old battery (positive '+' and negative '-' ends).
  4. Insert the new Philips CR2032 battery, aligning the positive (+) side upwards as indicated by the device's markings.
  5. Securely close the battery compartment.
  6. Power on the device to confirm operation.

Care:

  • Store batteries in a cool, dry place away from direct sunlight and heat.
  • Keep batteries away from small children and pets. If swallowed, seek immediate medical attention.
  • Do not attempt to recharge, short-circuit, disassemble, or incinerate the battery, as this can cause leakage or explosion.
  • Dispose of used batteries responsibly according to local regulations.