Gorilla Contact Adhesive 75g & Epoxy 25ml Set - Gorilla
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Gorilla Contact Adhesive & Epoxy Set is for DIY enthusiasts and professionals needing versatile and strong bonding solutions. Its key benefit is providing two distinct, high-performance adhesives in one convenient package for a wide range of materials and applications. A potential caveat is that proper surface preparation is crucial for optimal bond strength, especially for the contact adhesive.
All features
| Brand | Gorilla |
|---|
Extended Product Information
FAQs
What is the difference between the contact adhesive and the epoxy?
The contact adhesive is fast-drying and crystal clear, best for large surface areas where a clean look is desired. The epoxy provides a strong, gap-filling, and water-resistant bond, ideal for tougher repairs on smaller or uneven surfaces.
Can I use these adhesives on foam?
Gorilla Contact Adhesive is generally not recommended for use on foam as it can dissolve some types of foam. The epoxy may be suitable for some foams, but testing on a small area is advised.
How long does the epoxy take to cure?
The cure time varies depending on the specific epoxy formulation and environmental conditions. Typically, it will be set within 1-2 hours and fully cure within 24 hours. Refer to the product packaging for precise timings.
How long does the contact adhesive take to dry?
Gorilla Contact Adhesive is fast-drying. Surfaces should be joined when the adhesive is tacky to the touch, usually within 5 to 15 minutes after application, depending on temperature and humidity.
Are these adhesives paintable?
Once fully cured, the epoxy can typically be painted over. The contact adhesive, being clear, is usually not intended to be painted over unless it is a specific formulation designed for that purpose. Always check the product instructions.
Can I use the contact adhesive for bonding fabric?
Gorilla Contact Adhesive can bond many fabrics, but it's best to test on a small, hidden area first, as some delicate fabrics may be affected. Ensure good ventilation during use.
What is the shelf life of the adhesives?
Unopened, the adhesives typically have a shelf life of 1-2 years when stored properly in a cool, dry place. Once opened and used, their longevity depends on how well they are resealed and stored.
Troubleshooting
Adhesive not bonding strongly
Ensure surfaces were properly cleaned, dried, and prepared. For contact adhesive, ensure it was allowed to become tacky before bonding. For epoxy, ensure equal parts were mixed thoroughly.
Contact adhesive remains wet and sticky
Humidity or low temperature may be affecting drying time. Try applying in a warmer, drier environment. Avoid applying excessively thick coats.
Epoxy has cured too quickly or not at all
Verify that equal amounts of resin and hardener were used and mixed thoroughly. Temperature can affect cure time; avoid extreme heat or cold during application and curing.
Adhesive leaving a visible seam
Contact adhesive should dry clear. Ensure application was even and not too heavy. For epoxy, try to minimize excess overflow before it cures.
Pros and Cons
Pros
- Offers two distinct adhesive types for diverse project requirements.
- Provides a clear, professional finish with the contact adhesive.
- Suitable for both indoor and outdoor use due to water resistance.
- Bonds a wide range of common materials effectively.
- Delivers strong, durable bonds suitable for repairs and construction.
Cons
- Requires careful application and surface preparation for best results.
- Contact adhesive may require temporary clamping or support during drying.
- Epoxy has a limited working time once mixed, requiring quick application.
- Not recommended for all plastics; testing on a small area is advised.
- May not be suitable for extremely flexible materials.
Setup, Compatibility & Care
Setup:
- Contact Adhesive: Ensure surfaces are clean, dry, and free from dust and grease. Apply a thin, even coat to both surfaces. Allow to become tacky (typically 5-15 minutes) before pressing firmly together. Temporary clamping may be needed.
- Epoxy: Mix equal parts of the resin and hardener on a clean, disposable surface. Stir thoroughly for the specified time (usually 30-60 seconds). Apply the mixed epoxy to one or both surfaces.
Compatibility:
Both adhesives work well on wood, metal, ceramic, glass, stone, and most plastics. Test on a small, inconspicuous area first, especially with plastics, to ensure compatibility.
Care:
Store adhesives in their original containers in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure caps are tightly sealed after each use to maintain product integrity. Clean up any excess uncured adhesive immediately using appropriate solvents as recommended by Gorilla (often denatured alcohol or mineral spirits, depending on the adhesive type). Cured adhesive can be more difficult to remove.