Ferris Teak Oil - 2 Litre
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Ferris Teak Oil - 2 Litre is designed for homeowners and DIY enthusiasts seeking to protect and enhance their outdoor wooden furniture, decking, and marine wood. Its key benefit is providing deep, robust protection against weather and UV damage while restoring natural warmth and elegance. A potential consideration is that it's formulated for hardwoods like teak, so results may vary on other wood types.
All features
| Model Part Number | FERR15082 |
|---|---|
| Brand | Ferris |
Extended Product Information
FAQs
How often should I reapply Ferris Teak Oil?
Reapplication frequency depends on environmental exposure. Typically, it's recommended once or twice a year, or whenever the wood begins to look dry or lose its luster.
Can I use this oil on painted or varnished wood?
No, this oil is designed for bare wood. Old finishes must be completely removed before application for optimal results.
Is this product safe for indoor use?
Yes, the eco-friendly and non-toxic formula makes it safe for both indoor and outdoor use.
What type of wood is this oil best suited for?
It is specifically formulated for teak and other dense hardwoods, providing them with ultimate protection and restoration.
How much area does a 2-litre bottle cover?
The 2-litre bottle is designed to cover extensive areas. Actual coverage will vary based on the porosity and condition of the wood, as well as the application thickness.
How long does the finish last?
The premium satin finish provides durable protection. However, the longevity depends on the wood's exposure to the elements, and reapplication is recommended periodically.
Can I apply this oil in cold weather?
It is best to apply the oil in moderate temperatures (above 10°C or 50°F) to ensure proper absorption and drying. Avoid application in freezing conditions.
Troubleshooting
Uneven finish or patchy appearance
Ensure excess oil was wiped off thoroughly after application. Apply a second thin coat if necessary, ensuring to wipe off any excess.
Wood remains dull after application
The wood may require a deeper clean or a second application. Allow adequate penetration time, and ensure all excess is removed.
Oil leaving a sticky residue
Too much oil was applied, or excess was not wiped off properly. Ensure all pooled or unabsorbed oil is removed from the surface.
Product does not seem to penetrate
The wood surface might be sealed or too smooth. Lightly sanding the surface can improve penetration. Ensure the wood is dry.
Pros and Cons
Pros
- Provides deep and lasting protection for hardwoods.
- Restores the natural look and feel of weathered wood.
- Easy to apply, even for beginners.
- Eco-friendly and non-toxic formula.
- Leaves a beautiful satin finish.
Cons
- Primarily formulated for teak and hardwoods; may perform differently on other wood types.
- Requires reapplication periodically to maintain optimal protection.
- Coverage may vary based on wood porosity and application thickness.
Setup, Compatibility & Care
Setup:
- Ensure the wooden surface is clean, dry, and free from any old finishes, dirt, or mildew. Sand lightly if necessary.
- Apply the oil generously using a brush, cloth, or roller.
- Allow the oil to penetrate for 15-30 minutes.
- Wipe off any excess oil that has not been absorbed.
Compatibility:
- Ideal for teak, hardwoods, and other dense, oily woods.
- Suitable for outdoor furniture, decking, fences, and marine applications.
- Can be used on both new and old wood.
Care:
- Store the product in a cool, dry place away from direct sunlight.
- Ensure the lid is tightly sealed to preserve the product's integrity.
- Periodically clean wooden surfaces treated with Ferris Teak Oil using mild soap and water. Reapply the oil as needed, typically once or twice a year, depending on exposure.