Cuprinol Ultimate Furniture Oil Spray 500ml - Clear
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for owners of teak and other hardwood garden furniture looking to protect and enhance its appearance. The Cuprinol Ultimate Hardwood Furniture Oil Spray provides long-lasting protection deep into the wood with added UV additives to shield against sun damage. While it offers a highly protective finish, it is specifically designed for bare or previously oiled hardwood and not suitable for indoor use.
All features
| Model Part Number | 5212401 |
|---|---|
| Brand | Cuprinol |
Extended Product Information
FAQs
Can I use this oil on indoor wooden furniture?
No, Cuprinol Ultimate Hardwood Furniture Oil Spray is specifically formulated for outdoor use on hardwood garden furniture and is not suitable for indoor applications.
How often should I reapply this oil?
The frequency of reapplication depends on weather exposure. For best results and continued protection, it is recommended to reapply annually or when the wood begins to look dry or weathered.
What is the coverage rate of this spray?
The surface coverage is approximately 24 m²/L, depending on the porosity and condition of the wood.
Can I use this on pine or softwood garden furniture?
This product is specifically designed for teak and other hardwoods. For softwoods, a different product may be more suitable. Always check product suitability for your specific wood type.
How long does it take for the oil to dry?
Allow 15 minutes between coats. The wood should not feel sticky. Longer drying times may be needed in cooler or more humid conditions.
What does 'bare or previously oiled' mean?
It means the wood surface should either be new and unfinished (bare) or have been treated previously with an oil-based product. It should not have paint, varnish, or sealant on it.
How do I clean up my tools after use?
After use, wipe the spray nozzle clean with a damp cloth. If the nozzle becomes blocked, you can clear it by placing the dip tube in clean water and spraying until clear water comes through.
Troubleshooting
Spray nozzle is blocked.
Wipe the nozzle clean with a damp cloth. If still blocked, unscrew the nozzle, place the dip tube in clean water, and spray until clear water passes through.
Uneven finish or streaks.
Ensure light, even coats are applied from the correct distance. Wipe off excess oil between coats. Allow adequate drying time between coats.
Wood still feels sticky after application.
Allow more drying time. Humidity or over-application can cause stickiness. Ensure only light coats are applied and excess is wiped off thoroughly.
Product not adhering to the surface.
Ensure the surface is bare or previously oiled hardwood. If the surface was painted, varnished, or heavily weathered, it needs to be stripped back or restored before application.
Pros and Cons
Pros
- Provides deep, nourishing protection for hardwood furniture.
- Offers excellent UV resistance to prevent sun damage and greying.
- Enhances the natural beauty and grain of the wood.
- Added waxes ensure superior water repellency.
- Convenient spray application makes re-oiling faster.
- Long-lasting results compared to standard oils.
Cons
- Only suitable for bare or previously oiled hardwood furniture.
- Not recommended for indoor use.
- Requires surface preparation for best results.
- May require multiple coats for full protection.
- VOC content is notable, requiring good ventilation during use.
Setup, Compatibility & Care
Compatibility:
This oil is suitable for teak and other hardwood garden furniture. It is intended for use on bare or previously oiled surfaces only. Do not use on painted, varnished, or stained wood, or for indoor furniture.
Surface Preparation:
Before application, remove loose dirt, algae, lichen, and moss with a stiff brush or scraper. Treat any heavy growth with a suitable garden cleaner or fungicidal wash. If the wood has become grey and weathered, use a product like Cuprinol Furniture Restorer to bring back its natural color before applying the oil.
How to Use:
Ensure the nozzle is clean before use. Apply 2 light, even coats from approximately 15cm (6 inches) away. Avoid concentrating the spray on one spot. Wipe off any excess oil between coats. Allow 15 minutes between coats, or longer if the wood still feels sticky.
Tool Cleaning:
After use, wipe the spray nozzle clean with a damp cloth. If the nozzle becomes blocked during storage, unscrew it from the bottle. Place the dip tube into a container of clean water and spray until clear water passes through the nozzle. This clears any dried product from the dip tube and nozzle.
Storage:
Store in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the can is sealed properly after use.