Frenchic Wall Paint - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Wall Paint in Grey is ideal for homeowners seeking a versatile, easy-to-use, and durable interior paint. Its key benefit is the combination of a beautiful ultra-matte finish with self-priming, self-sealing, and scrubbable properties, minimizing prep and maintenance. A potential caveat is that the misty greyish-blue-green tone might not suit all colour schemes or personal preferences.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 39780693311575 |
| Brand | Frenchic |
Extended Product Information
FAQs
Is this paint suitable for a bathroom?
This paint is suitable for most interior walls and ceilings, but it is not recommended for very wet areas like shower enclosures or bath surrounds. For bathrooms with good ventilation, it can be used on walls away from direct water splash.
How much paint do I need?
A 2.5l tin covers up to 35m² with one coat. For best results and durability, two coats are recommended, meaning one 2.5l tin will cover approximately 17.5m².
Do I need to use a primer?
No, this paint is self-priming, meaning you can apply it directly to most prepared surfaces without a separate primer.
Can I paint over existing gloss paint?
Yes, but it is recommended to lightly sand any glossy surfaces first to ensure good adhesion. The paint is self-sealing, so no topcoat is needed.
What is the drying time?
The paint is typically touch dry in 1-2 hours and recoatable after 2-4 hours, depending on conditions such as temperature and humidity. Full curing for maximum scrubbability takes longer.
Is this paint safe for children's rooms?
Yes, the paint is EN71-3 certified, making it safe for use on children's toys and in children's rooms. It is also water-based with low VOCs and virtually no odour.
How do I clean the painted surface?
Once fully cured, the paint is completely scrubbable. Use a damp cloth with a mild detergent for cleaning. Avoid abrasive cleaners.
Can I use this paint on radiators?
Yes, it is suitable for powder-coated radiators. Ensure the radiator is clean and dry before application.
Troubleshooting
Paint not adhering well
Ensure the surface was properly cleaned and degreased. Lightly sand any glossy surfaces before application. Check that the surface was not excessively porous or dusty.
Streaky or uneven finish
Ensure the paint was thoroughly stirred. Apply using consistent brush strokes or roller technique. Avoid overworking the paint. Ensure adequate lighting to see coverage.
Brush marks visible
Use a high-quality synthetic brush designed for water-based paints. Apply thin, even coats and avoid overloading the brush. Reduce pressure towards the end of each stroke.
Paint seems too thick
Stir vigorously. If still too thick for your application method, very lightly thin with a small amount of water (no more than 5% per litre), but this may affect coverage and durability slightly.
Difficulty cleaning marks after curing
Ensure the paint has been allowed to fully cure (up to 7 days). Use a soft cloth with mild soap and water. For stubborn marks, a slightly firmer but still gentle scrub may be needed. Avoid harsh chemicals or abrasive pads.
Pros and Cons
Pros
- Reduces preparation time with self-priming and self-sealing properties.
- Easy to clean and maintain due to its scrubbable finish.
- Low VOCs and virtually no odour contribute to a healthier indoor environment.
- Durable and long-lasting, ideal for busy households.
- Versatile for use on multiple interior surfaces.
- Approved for use on children's toys.
Cons
- The specific misty greyish-blue-green hue may not complement all decor styles.
- Two coats are recommended for best results, increasing paint usage for full coverage.
- Not recommended for very wet areas like shower surrounds.
- Requires a full curing period for maximum durability, meaning it's not immediately at its most scrubbable.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaky paint. Lightly sand glossy surfaces to improve adhesion. As the paint is self-priming, no specific primer is typically required unless dealing with highly problematic surfaces or stains.
Application: Stir the paint thoroughly before use. Apply with a good quality synthetic brush or roller. For walls and ceilings, two coats are recommended for optimal colour depth and durability. Allow sufficient drying time between coats (typically 2-4 hours, but check conditions). Ensure good ventilation during application and drying.
Compatibility: Suitable for interior walls, ceilings, primed wood, interior woodwork, wooden floors, kitchen cupboards, metal, powder-coated radiators, and interior uPVC. It is not recommended for very wet areas such as shower enclosures or bath surrounds.
Care: Once fully cured (allow several days to a week), the paint is completely scrubbable. Clean spills and marks promptly using a damp cloth and mild detergent if necessary. Avoid abrasive cleaners or scouring pads that could damage the finish.