Ansmann Li-Ion 18650 Battery 3.6V 2600mAh with Micro USB - Silver



Currently unavailable



Currently unavailable
This Ansmann 18650 3.6V Li-Ion battery is designed for users of high-drain devices like LED torches and headlights, offering convenient charging via its integrated Micro USB socket and a built-in safety board for protection. While its versatility is a key benefit, users should be aware that the integrated safety board makes it approximately 3-4mm longer than standard 18650 batteries. Key features include USB charging, a charge status LED, high cycle stability, and protection against overcharge, short circuit, and deep discharge.
| Colour | Silver |
|---|---|
| Model Part Number | 1307-0002 |
| Brand | Ansmann |
Charging time varies depending on the power source. Using a standard 5V USB adapter, charging will be limited by the battery's internal 1A limit. A full charge from empty typically takes several hours. Using a dedicated lithium charger may offer faster charging if it supports the appropriate current (up to 2.6A).
No, the Micro USB charging cable is not included with the battery.
This battery features an integrated safety board for protection against overload, short circuit, and deep discharge. This board adds approximately 3-4mm to its length compared to unprotected 18650 batteries.
This battery is listed as suitable for e-cigarettes. However, always ensure your device's specifications are compatible with an 18650 Li-Ion battery and its voltage/capacity.
The battery comes with a 2-year manufacturer warranty.
Yes, you can use a compatible lithium battery charger. Ensure the charger is designed for 18650 Li-Ion batteries and has appropriate safety features. The integrated USB port provides an alternative charging method.
The primary differences are the integrated Micro USB charging port, the built-in safety board, and the slightly longer physical dimensions. Standard 18650 batteries typically require an external charger and may lack integrated protection circuits.
Ensure the Micro USB cable is securely connected to both the battery and a functional power source. Try a different Micro USB cable and power source. Clean the Micro USB port on the battery.
Verify the battery is correctly inserted in the device. Check if the battery is fully charged by observing the LED indicator. Ensure the device is compatible with 18650 Li-Ion batteries and their dimensions.
Ensure the device is not in standby mode if not necessary. Check for any damage to the battery or device. Continuous high-drain usage will naturally reduce runtime compared to low-drain applications.
While the battery may still charge, a non-functional LED might indicate an internal issue. Try charging and check if the device powers on to confirm functionality. Contact customer support if issues persist.
Setup:
To charge the battery via Micro USB, connect a standard Micro USB cable (not included) to the port on the battery and to a 5V USB power source such as a PC, power bank, or USB adapter. The LED indicator will turn red during charging and green when fully charged. Alternatively, the battery can be charged using a compatible lithium battery charger.
Compatibility:
This is an 18650 size Lithium-Ion battery. It is designed for devices that accept 18650 batteries and can accommodate its slightly increased length (approx. 3-4mm longer than standard) due to the integrated safety board. It is suitable for LED torches, headlights, laser pens, and other similar electronic devices.
Care:
Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. Avoid exposing the battery to water or corrosive substances. Do not attempt to disassemble the battery, as this can be dangerous. Ensure the charging contacts and the Micro USB port are clean and free from debris. Regularly inspect the battery for any signs of damage.