Bartoline Ready Mix Plaster Skim Repair Smooth Finish White Interior Use 2.5L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Bartoline Ready Mix Plaster Skim Repair is designed for DIYers and professionals needing to quickly and effectively repair minor imperfections on interior plaster and plasterboard surfaces before decorating. Its key benefit is excellent wet adhesion and non-slump properties, allowing for easy application and smoothing on vertical surfaces. A caveat is its limitation to filling holes up to 3mm deep; larger cavities require a different filler. It offers a smooth, white finish suitable for painting or wallpapering.
All features
| Model Part Number | 4X Bartoline Ready Mix Plaster Skim Repair Smooth Finish White Interior Use 2.5L |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
What is the maximum depth this product can fill?
This product is suitable for covering holes and imperfections up to 3mm deep. For larger cavities, it is recommended to use a suitable filler first.
Can I use this product on exterior surfaces?
No, Bartoline Ready Mix Plaster Skim Repair is designed for interior use only.
How do I prepare the surface before applying?
Surfaces must be sound, dry, clean, and free from dust and grease. Gloss-painted surfaces should be sanded to provide a key.
Can I paint over the repaired area?
Yes, once the surface is dry, it can be painted. It is recommended to seal the area first with a plaster sealer or a sealer/PVA mix for best results.
How should I store the product?
Store the product in a cool, dry place with the container tightly sealed to prevent it from drying out.
Can this be used on wood?
This product is specifically formulated for plaster and plasterboard. For wood repairs, a wood filler would be more appropriate.
Do I need to mix this product?
No, this is a ready-mixed product and requires no mixing before application.
Troubleshooting
Product is too stiff or dry
This may indicate the product has been stored incorrectly or for too long. Try adding a very small amount of water (a few drops at a time) and mixing thoroughly, but be cautious not to add too much. If severely dried out, it may need to be replaced.
Repair is cracking after drying
Ensure the depth of the repair does not exceed 3mm. For deeper holes, a multi-layer application or a different filler product should be used first. Also, ensure the surface was properly prepared and not too porous or damp.
Difficulty smoothing the surface
For initial smoothing, use a wet trowel shortly after application. If the material has started to set, allow it to dry fully and then use fine-grit sandpaper. Ensure your tools are clean.
Pros and Cons
Pros
- Convenient ready-mixed formula saves preparation time.
- Good adhesion ensures a lasting repair.
- Easy to apply and smooth, even on vertical surfaces.
- Provides a smooth finish ready for decorating.
- Suitable for quick touch-ups and minor surface repairs.
Cons
- Limited to filling depths of up to 3mm.
- Requires sealing before wallpapering.
- May require sanding for a perfectly smooth finish.
- Larger cavities need a different product first.
Setup, Compatibility & Care
Preparation is key: Ensure surfaces are sound, dry, clean, and free from dust, grease, or dampness. For painted surfaces, especially gloss finishes, lightly sand them to create a better grip for the plaster skim. If repairing plasterboard, ensure any nail heads are below the surface and ideally coated with an oil-based paint to prevent rust marks from appearing later.
Application: Apply the plaster skim using a large brush, trowel, or a suitable spreader. Work it into the repair area. After the initial setting, you can use a wet trowel to smooth the surface. Alternatively, let it dry completely and then use fine-grit sandpaper.
Compatibility: This product is suitable for use on plaster and plasterboard. It is intended for interior use only.
Care: Store the product in a cool, dry place. Ensure the container is tightly sealed when not in use to prevent it from drying out.